For Sale, For Trade Losi Truck
10-15-2006, 04:06 PM
#1
For Sale, For Trade Losi Truck
Team Losi Matt Francis edition truck:
MF2 chassis and front end
MF1 tranny and rear end
MF2 rear arms and carriers
CR steering rack
Losi Ti ball studs
Trinity Blue aluminum screws and stainless screws throughout
all bolts and nuts are aluminum
Custom Carbon fiber Hinge Pins throughout
Gen 2 Carbon Fiber outdrives machined to fit Gen1 tranny case also have Gen 1 outdrives
Aluminum Dogbones to fit Gen 1 and Gen 2 trannies
Aluminum Topshaft
Custom Lightened Slipper plates
Extra:
front arms
rear arms
caster blocks
spindles
front/rear bulkheads
carriers
carbon fiber hinge pins
ENTIRE CAR HAS BEEN 100% REBUILT!! after last race, I bought new caster blocks, spindles, carriers, bearings, bulkheads, chock cartridges, CR diff stuff. Every screw, bolt, part was cleaned one at a time, the diff is smoother than butter, shocks are silent, new Lunsfords all around and white ball cups (new) included. also has brand new low profile aluminum wheel nuts all around.
This car is light, and fast. It accelerates like no bodies business and will be one of the best off road trucks you will ever own!!
Lots of Tapers
Evil Twins
Bowties
Ifmars
1 used body
1 new professionally painted body still being painted so no pics but it's nice!
I'm looking for either $160 shipped for all this OR close equivilant XXX or B4 car.
Thanks for looking!
These pictures show the car with electronics and no lunsfords, but...the car DOES have them as of now and all $160 is minus electonics.
MF2 chassis and front end
MF1 tranny and rear end
MF2 rear arms and carriers
CR steering rack
Losi Ti ball studs
Trinity Blue aluminum screws and stainless screws throughout
all bolts and nuts are aluminum
Custom Carbon fiber Hinge Pins throughout
Gen 2 Carbon Fiber outdrives machined to fit Gen1 tranny case also have Gen 1 outdrives
Aluminum Dogbones to fit Gen 1 and Gen 2 trannies
Aluminum Topshaft
Custom Lightened Slipper plates
Extra:
front arms
rear arms
caster blocks
spindles
front/rear bulkheads
carriers
carbon fiber hinge pins
ENTIRE CAR HAS BEEN 100% REBUILT!! after last race, I bought new caster blocks, spindles, carriers, bearings, bulkheads, chock cartridges, CR diff stuff. Every screw, bolt, part was cleaned one at a time, the diff is smoother than butter, shocks are silent, new Lunsfords all around and white ball cups (new) included. also has brand new low profile aluminum wheel nuts all around.
This car is light, and fast. It accelerates like no bodies business and will be one of the best off road trucks you will ever own!!
Lots of Tapers
Evil Twins
Bowties
Ifmars
1 used body
1 new professionally painted body still being painted so no pics but it's nice!
I'm looking for either $160 shipped for all this OR close equivilant XXX or B4 car.
Thanks for looking!
These pictures show the car with electronics and no lunsfords, but...the car DOES have them as of now and all $160 is minus electonics.
Last edited by mafiaracers; 07-10-2008 at 12:59 AM.
10-15-2006, 04:35 PM
#2
mf2
I will trade you a bk 1.5 and a bk2 roller with the skip gear mod that is hard to get. bk 1.5 is fresh and bk2 tranny needs rebuilt. Can send pics if interested.
10-15-2006, 05:01 PM
#4
Tech Adept
Join Date: May 2006
Location: I dont race that LST anymore I'm Just to lazy to change my Screen name
Posts: 243
wish i had of see this before I just bid on one on ebay damit
10-15-2006, 06:24 PM
#6
Tech Adept
Join Date: May 2006
Location: I dont race that LST anymore I'm Just to lazy to change my Screen name
Posts: 243
I will know in a few hrs if I get out bid. If I do I will take it. I need an electric since redfrog closed I got nutin to race this winter.
10-16-2006, 03:03 PM
#11
Tech Adept
Join Date: May 2006
Location: I dont race that LST anymore I'm Just to lazy to change my Screen name
Posts: 243
ygpm
10-16-2006, 03:05 PM
#12
i have a ft b4 ill trade
10-16-2006, 07:04 PM
#14
http://rctech.net/forum/showthread.p...26#post2706226
Interested. I have great feedback and will throw in money.
[email protected]
Interested. I have great feedback and will throw in money.
[email protected]
10-16-2006, 07:28 PM
#15
Tech Rookie
Interested in a TC3 Nitro?
I have a TC3 nitro I'll trade...ran less than 5 times at the local school