DX3S Temp Sensor
#32
As a side not regarding temp, I have moved the sensor to between the lowest and second lowest heat sink and it matches perfectly to my heat gun. Now I just gotta get the temps where I want it and im as happy as larry!
#33
My RPM sensor never worked. I repositioned it, and was still unable to get it to work. From what I've read, many of the RTRs shipped with the RPM sensor incorrectly positioned. If you move it closer to the clutch bell, and ensure the sticker is in place you should be able to get it to work.
#34
My Rpm sensor said I was going 137 mph!!!
#36
i've got the same sytem and mine is way off. was fine for about the 1st 6 tanks then went wacky. it kept reading 260-290. so i would check it with my temp gun and it was 190-200. thought mine gun was bad and my buddies read the same thing. so i pulled it out. plus the beeping drives me INSANE!
#37
i've got the same sytem and mine is way off. was fine for about the 1st 6 tanks then went wacky. it kept reading 260-290. so i would check it with my temp gun and it was 190-200. thought mine gun was bad and my buddies read the same thing. so i pulled it out. plus the beeping drives me INSANE!
Mine read 30 degrees hotter than the temp gun. It was very consistant, so I just set the warning temp to 300 degrees. My RPM sensor kept getting dirty and not reading correctly. I just run it now without telemetry and use the voltage reading to know when to recharge my receiver battery.