Glow plug
#1
Tech Apprentice
Thread Starter
Glow plug
What glow plug is good for 40% nitro fuel
#2
Tech Initiate
The coldest one.. 40% seems like overkill to me.
#3
Originally Posted by nitrodudes
The coldest one.. 40% seems like overkill to me.
#4
again, what the hell are you using 40% for? back off! lol drop down to like 20%
#6
I use 16% for my 10th
#7
you must be mixing it yourself, cause what dumb ass fuel company would mix 40%
#8
Originally Posted by Chris West
you must be mixing it yourself, cause what dumb ass fuel company would mix 40%
Mark
#9
Tech Rookie
wow 60% that is high
#10
Dont use 40%
i have had many engines over the years and the max i have ever used was 20% i do everything from club events to gold cost challanges and some state titles and most of the guys there use 16% so if you want your engine to last long term drop the nitro down to 20% or 15% and like MANINTHEMUGEN said shim it.
i have had many engines over the years and the max i have ever used was 20% i do everything from club events to gold cost challanges and some state titles and most of the guys there use 16% so if you want your engine to last long term drop the nitro down to 20% or 15% and like MANINTHEMUGEN said shim it.
#12
Originally Posted by THE DOCTOR
You don't need to shim it if you run 20% or lower.
#15
Tech Apprentice
Go to www.rbproducts.com and scroll down the left side to "which glow plugs to use?" and look at the ambient temps vs. nitro, etc and see which to use.
Good luck
Good luck