Arizona RC Swap Meet
#3241
Anyone have or know someone that has a Tecno conversion for JQ? If you would, spread the word and let me know please.
#3242
Still have b44.1 roller with orion vst 4.5t motor proline body. Almost mint condition. Has aluminum wing mounts and front bearing carriers and big bore spring conversion pm me for pics. Looking to get 240
#3243
Looking for a M11x receiver
A great shape esc that will run a 7.5
Mylaps hybrid transponder
A great shape esc that will run a 7.5
Mylaps hybrid transponder
#3244
mike check the JQ thread. one in there at the end.
#3247
Tech Initiate
iTrader: (6)
everything is in great working order. motors and speed controls never over heated. batteries are not puffed and balanced
Tekin Redline 8.5t.....$30
Tekin Gen2 8.5t.....$40
Novak Pulse raced once and removed.....$115
Tekin RS Pro.....$100
2x Venom saddle 4500 mah 50c.....$30 each
2- Losi 22 buggy roller with savox servo and few extras.....$125 each
6x aka yellow 22 front wheels they are new in package.....$5 each
Text me for pics 602-909-8807
Tekin Redline 8.5t.....$30
Tekin Gen2 8.5t.....$40
Novak Pulse raced once and removed.....$115
Tekin RS Pro.....$100
2x Venom saddle 4500 mah 50c.....$30 each
2- Losi 22 buggy roller with savox servo and few extras.....$125 each
6x aka yellow 22 front wheels they are new in package.....$5 each
Text me for pics 602-909-8807
Last edited by E Rinke; 03-28-2013 at 03:53 PM.
#3249
Tech Master
iTrader: (25)
FS - RTR B4.1 $350 firm
Text 6237603500
Got this in a trade...just went through it, cleaned it, made it RTR
B4.1 converted to Factory Team (Minus motor plate and battery brace)
Includes: CF arms and towers, blue titanium turnbuckles, RPM ball cups, v2 shocks, Jconcepts steering rack.
2 sets of street tires
1 body
Futaba S3003 steering servo
LRP Sphere competition TC Spec esc with original box
Spektrum Dx2e TX/RX with original box
Equinox li-po cell balancer
Onyx 230 li-po charger
Team Orion pro stock 13.5
Duratrax 5000mah 2s li-po
Text 6237603500
Got this in a trade...just went through it, cleaned it, made it RTR
B4.1 converted to Factory Team (Minus motor plate and battery brace)
Includes: CF arms and towers, blue titanium turnbuckles, RPM ball cups, v2 shocks, Jconcepts steering rack.
2 sets of street tires
1 body
Futaba S3003 steering servo
LRP Sphere competition TC Spec esc with original box
Spektrum Dx2e TX/RX with original box
Equinox li-po cell balancer
Onyx 230 li-po charger
Team Orion pro stock 13.5
Duratrax 5000mah 2s li-po
Need this gone 300 (no battery) takes this
Last edited by Spoold97; 03-26-2013 at 12:46 PM.
#3252
#3254
Tech Regular
iTrader: (7)
***B4.1 Factory Team Worlds Roller***
-B4.1 Factory Team Worlds Kit (10-15 race nights of use). Car is fully rebuilt,
new shock oil and seals, diff was gone through the carbide diff balls and diff
rings and thrust bearings only had 2 race nights on them and I went through the diff cleaned everything did a quick polish on the diff rings and re-lubed
everything (diff is smooth).
Hop-ups include: Hex conversion front, Jconcepts alloy clamping hexes front and rear, Jconcepts alloy serrated wheel nuts, Avid complete front and rear big bore spring sets (batch 1), Avid alloy big bore top spring holder adapters, AE big bore lower spring holder cups, Avid alloy front steering rack, Avid alloy vented motor plate, RPM black gear cover, AE carbonfiber C-Hubs (not on car, but included), AE 2-hole 30* caster blocks.
Extra parts include: New clear Jconcepts Finnisher +8mm body, 2 new Jconcepts wings, 2 used Jconcepts wings, new pair of rear Jconcepts Double Dees tires, new shock pistons, pack of 50 new shock orings, new steering rack, new front arms, new front tower, new rear tower, new rear t-plate, new cvd rebuild kit, new servo link, new lower shock ends, new lower idler gear, new rear hub towers, new wing mounts (x 2), small organizer full of other misc extra parts (full set of extra factory team turnbuckles).
Extra tires/wheels: Rear mounted Flip-outs (50% tread left), rear mounted
holeshots (75% tread left), rear mounted panther raptors (100% tread left), 2
pairs used rear wheels, front mounted proline 4 rib (90% tread left), front
mounted jconcept groovy (80% tread left), 1pair front new wheels, 1pair front
used wheels.
$180- for everything (roller, no electronics included)
Located in Gilbert
-B4.1 Factory Team Worlds Kit (10-15 race nights of use). Car is fully rebuilt,
new shock oil and seals, diff was gone through the carbide diff balls and diff
rings and thrust bearings only had 2 race nights on them and I went through the diff cleaned everything did a quick polish on the diff rings and re-lubed
everything (diff is smooth).
Hop-ups include: Hex conversion front, Jconcepts alloy clamping hexes front and rear, Jconcepts alloy serrated wheel nuts, Avid complete front and rear big bore spring sets (batch 1), Avid alloy big bore top spring holder adapters, AE big bore lower spring holder cups, Avid alloy front steering rack, Avid alloy vented motor plate, RPM black gear cover, AE carbonfiber C-Hubs (not on car, but included), AE 2-hole 30* caster blocks.
Extra parts include: New clear Jconcepts Finnisher +8mm body, 2 new Jconcepts wings, 2 used Jconcepts wings, new pair of rear Jconcepts Double Dees tires, new shock pistons, pack of 50 new shock orings, new steering rack, new front arms, new front tower, new rear tower, new rear t-plate, new cvd rebuild kit, new servo link, new lower shock ends, new lower idler gear, new rear hub towers, new wing mounts (x 2), small organizer full of other misc extra parts (full set of extra factory team turnbuckles).
Extra tires/wheels: Rear mounted Flip-outs (50% tread left), rear mounted
holeshots (75% tread left), rear mounted panther raptors (100% tread left), 2
pairs used rear wheels, front mounted proline 4 rib (90% tread left), front
mounted jconcept groovy (80% tread left), 1pair front new wheels, 1pair front
used wheels.
$180- for everything (roller, no electronics included)
Located in Gilbert
#3255
Tech Addict
iTrader: (25)
T4.1 in GREAT condition. Everything is there. I ran it maybe six club races and States. No stripped plastic screw holes. The truck is stock with the exception of .0 hubs, comes with ballist weight. Comes with soft Bar Codes that have only one run on them. And ofcourse the body. Sold
Novak Ballistic 13.5 Bought it new for States and never run since 60$
More pictures on the next post
Novak Ballistic 13.5 Bought it new for States and never run since 60$
More pictures on the next post
Last edited by Jiggawatt; 03-27-2013 at 07:29 PM.