Steering wheel grip
#16
anyone make those for an m8? the hex wheel adapter?
#17
Originally posted by patelladragger
a dude on ebay sells the hex adapter for the mars for 2 dollars. Get one of those and you can put any size foam or rubber sedan wheel on your mars.
a dude on ebay sells the hex adapter for the mars for 2 dollars. Get one of those and you can put any size foam or rubber sedan wheel on your mars.
#18
I use HEAD's pro grip overwraps meant for tenis racks to replace the foam on my TX, stick one layer on using double sided tape. now the steering wheel carry the HEAD logo
#19
Tech Apprentice
I had the same problem. Take a rubber band and wrap it around the middle of the wheel. It creates a small dip in the middle and the rubberband keeps your fingers from slipping.
Problem solved.
Problem solved.
#21
well you guys might be joking around but I noticed on Ralph Burch's mars ex1 he has an oversized wheel on it. I put a 24mm foam TC wheel on mine and it really feels much better to me.
burch and blackletter at the worlds
burch and blackletter at the worlds
#22
i own a ko transmeter .... how do i remove the original wheel ?
#25
Tech Elite
iTrader: (16)
Originally posted by Sigearhead
Is that a left-handed radio? I didn't know KO made a left-handed radio. If you look at the picture the transmitter wheel has to be controlled with your left hand
Is that a left-handed radio? I didn't know KO made a left-handed radio. If you look at the picture the transmitter wheel has to be controlled with your left hand
Trips
#27
A Limited Edition!!!
#28
Originally posted by IMPACTPLAYR
Remove the small hex shaped piece in the center of the wheel, there is a screw behind it......
Remove the small hex shaped piece in the center of the wheel, there is a screw behind it......
#30
Originally posted by Sigearhead
Are you really a "taquito"?
Are you really a "taquito"?
Small Burro = Burrito
Small Mosque = Mosquito
Small Taco = Taquito
I don't think so