Tamiya TB Evolution V
#211
Tech Elite
Join Date: Mar 2004
Location: MOOD;; feeling good not racing ,saving shed loads of money,lovely Tan i have aswell
Posts: 4,762
Originally Posted by 414play
Maybe I got the shiming wrong, but every other evo IV racer at the tracks I race had the same problems, most of us went back to belt cars.
my evo 4 is really very quite compared to the loud SD or LCG
just a whistle of speed
#212
Tech Master
Join Date: May 2005
Location: Under that rock you just kicked over!!!!
Posts: 1,040
Originally Posted by MR JOLLY
are still using 64dp spur`s ??
my evo 4 is really very quite compared to the loud SD or LCG
just a whistle of speed
my evo 4 is really very quite compared to the loud SD or LCG
just a whistle of speed
WAKE UP JOLLY ITS ONLY A DREAM!!!!
#214
Tech Fanatic
Originally Posted by swimbikerun
How many of the parts are shared with the MSX? I'm assuming the suspension components are (arms, knuckles, blocks, etc). Thanks.
#215
Originally Posted by 414play
Maybe I got the shiming wrong, but every other evo IV racer at the tracks I race had the same problems, most of us went back to belt cars.
#217
Tech Elite
Join Date: Mar 2004
Location: MOOD;; feeling good not racing ,saving shed loads of money,lovely Tan i have aswell
Posts: 4,762
Originally Posted by KilRuf
I haven't had any trouble with my gears running a 7x1. I think the key is shimming. I shim it so that when the gears mesh towards each other, they won't bind. And when they mesh apart, it won't be too far apart that they can strip. Only thing I break are the plastic spool outdrives.
can you get seperatly
#218
Tech Regular
Originally Posted by MR JOLLY
those plastic outdrives for the spool
can you get seperatly
can you get seperatly
#220
I just switched to the TA05 steel outdrives. No problems with them. And the car still spins free lock to lock with no motor, no pinion.
#223
Anyone knows if the kit will come with spare toe block like the MSX to adjust the rear toe to -2.5. If not, would a C block the go to get -2.5 deg toe.
#225
No front on board toe must be a shaft thingy since most of the belt cars normally have them. Anyway might include a few optional toe blocks when I get the car. Can't wait for next week