Serpent 710
06-04-2004, 12:49 AM
Tech Fanatic
Originally posted by InitialD
Not if you have the "Moteur rode" sticker version on the box.
That one is broken in in the factory already.
Not if you have the "Moteur rode" sticker version on the box.
That one is broken in in the factory already.
06-04-2004, 12:49 AM
Originally posted by GoldFinger
!!! Dont do that !
If it still stuck.. good, dont remove it. Mostly a "new" engine is difficult to pull out the engine. Should be easier after completely broken in.
If still hard to do, (if it was my engine) I prefer to let it there.
Just take up the sleeve and spray the piston and crankshaft with CRC(contact cleaner) or Permatex(carb/choke cleaner).
Do not use your kungfu for this part.
!!! Dont do that !
If it still stuck.. good, dont remove it. Mostly a "new" engine is difficult to pull out the engine. Should be easier after completely broken in.
If still hard to do, (if it was my engine) I prefer to let it there.
Just take up the sleeve and spray the piston and crankshaft with CRC(contact cleaner) or Permatex(carb/choke cleaner).
Do not use your kungfu for this part.
ok no kungfu then 
06-04-2004, 12:50 AM
Originally posted by InitialD
You have to flaunt it some times.
You have to flaunt it some times.
06-04-2004, 12:51 AM
Re: Re: Re-post
Originally posted by InitialD
Yup. Saw it. Well, I guess slower servos will suite some hands while some people will swear by faster steering servos. I know people who purposely look for the slightly slower analog steering servos because they simply cannot drive with faster digital ones. One man's meat, another man's poison.
Yup. Saw it. Well, I guess slower servos will suite some hands while some people will swear by faster steering servos. I know people who purposely look for the slightly slower analog steering servos because they simply cannot drive with faster digital ones. One man's meat, another man's poison.
06-04-2004, 12:52 AM
Originally posted by Schrijver99
Or read the JP engine thread
Or read the JP engine thread
06-04-2004, 12:52 AM
Originally posted by Schrijver99
Or read the JP engine thread
Or read the JP engine thread
I didn't want to mention the thread - he's got the RING, you know - god knows what he'd do if he got angry 
06-04-2004, 12:53 AM
Originally posted by GoldFinger
Just need to bring up heat and get some comfortability with new oil will not hurt your engine bro..
Just need to bring up heat and get some comfortability with new oil will not hurt your engine bro..
06-04-2004, 12:54 AM
Re: Re: Re: Re: Re: Re: Re: Re: Re: D, a friday pic for you!
Originally posted by markp27
Do you know what the orange seal is for?
Old sleave I'll have to buy another JP, then 
Do you know what the orange seal is for?
Old sleave
I'll have to buy another JP, then
The last i don't know for sure because i don't have an old JP crankshaft to have a better look. Don't want to kill my other ones while they still work.
06-04-2004, 12:55 AM
Originally posted by InitialD
Damn. And I thought I could fool Mark.
Damn. And I thought I could fool Mark.
ehm ....
06-04-2004, 12:56 AM
D,
What do you think of the STS D3 engines?
How about the Project Zen Team Motor?
http://www.projectzen.net/page2.html
What do you think of the STS D3 engines?
How about the Project Zen Team Motor?
http://www.projectzen.net/page2.html
06-04-2004, 12:56 AM
Originally posted by InitialD
True. But let's get a JP engine first before doing all this talk.
True. But let's get a JP engine first before doing all this talk.
06-04-2004, 12:56 AM
Originally posted by markp27
Schrijver99, I was trying to make D look good I didn't want to mention the thread - he's got the RING, you know - god knows what he'd do if he got angry
Schrijver99, I was trying to make D look good
I didn't want to mention the thread - he's got the RING, you know - god knows what he'd do if he got angry
No wonder crashed_1 is always agreeing with me.
Perhaps he still wants to make me believe that all this while the RING that I supposedly have is indeed the real one.
06-04-2004, 12:59 AM
Originally posted by markp27
Schrijver99, I was trying to make D look good I didn't want to mention the thread - he's got the RING, you know - god knows what he'd do if he got angry
Schrijver99, I was trying to make D look good
I didn't want to mention the thread - he's got the RING, you know - god knows what he'd do if he got angry
06-04-2004, 01:02 AM
Originally posted by PSI Racing
D,
What do you think of the STS D3 engines?
How about the Project Zen Team Motor?
http://www.projectzen.net/page2.html
D,
What do you think of the STS D3 engines?
How about the Project Zen Team Motor?
http://www.projectzen.net/page2.html
I myself am running the older version of the STS RS3 engine. Had to change the conrod to a Nova one. More reliable. Overall bang for the buck I must say. But I hear the newer D3 and D5 ones still need their conrods to be checked once in a while.
I guess they are the same with Sirio engines. You need to check the conrod from time to time.
06-04-2004, 01:03 AM
Originally posted by Schrijver99
I like to battle the ring with my darkside of the FORCE
I like to battle the ring with my darkside of the FORCE
