1LikesBarracuda from Alex racing
10-05-2003, 09:42 AM
#4816
Originally posted by ImGoinRCn
Hey, if you sell those Eagle springs, I'll pay what you paid for them, and tax if you paid that too...
Hey, if you sell those Eagle springs, I'll pay what you paid for them, and tax if you paid that too...
10-05-2003, 11:55 AM
#4818
Originally posted by Randman
Are they the titanium springs Joseph? I believe Eagle made those as well.
Are they the titanium springs Joseph? I believe Eagle made those as well.
10-05-2003, 08:00 PM
#4819
Originally posted by highwayman
cool... what rayspeed springs do you use? what is affected if you use the rayspeed ones, becuase i think they're a bit longer than the ALEX ones...
also, any tips on how to remember the different spring rates of the CUDA... (they're all black... kinda hard to mix them together, like i do with other manufacturers springs...)
ran the CUDA yesterday and today...
any suggestions on gettin some rear traction?
i'd also appreciate some tips for a long track with lots of on power sweeping turns...
thanks... - jason
cool... what rayspeed springs do you use? what is affected if you use the rayspeed ones, becuase i think they're a bit longer than the ALEX ones...
also, any tips on how to remember the different spring rates of the CUDA... (they're all black... kinda hard to mix them together, like i do with other manufacturers springs...)
ran the CUDA yesterday and today...
any suggestions on gettin some rear traction?
i'd also appreciate some tips for a long track with lots of on power sweeping turns...
thanks... - jason
Use the Reds and whites.
they work the best
-Dave
10-05-2003, 10:54 PM
#4821
Originally posted by highwayman
cool... what rayspeed springs do you use? what is affected if you use the rayspeed ones, becuase i think they're a bit longer than the ALEX ones...
also, any tips on how to remember the different spring rates of the CUDA... (they're all black... kinda hard to mix them together, like i do with other manufacturers springs...)
ran the CUDA yesterday and today...
any suggestions on gettin some rear traction?
i'd also appreciate some tips for a long track with lots of on power sweeping turns...
thanks... - jason
cool... what rayspeed springs do you use? what is affected if you use the rayspeed ones, becuase i think they're a bit longer than the ALEX ones...
also, any tips on how to remember the different spring rates of the CUDA... (they're all black... kinda hard to mix them together, like i do with other manufacturers springs...)
ran the CUDA yesterday and today...
any suggestions on gettin some rear traction?
i'd also appreciate some tips for a long track with lots of on power sweeping turns...
thanks... - jason
anyone got an opinion on the other questions?
thanks in advance...
10-06-2003, 10:06 AM
#4822
Tech Initiate
Hi.
My brother already has a speedway PAL barracuda that he got a while ago, but doesnt dare to use it.
I'm currently considering getting one cos they look like real nice cars. Just wondering though, who well do they go on carpet? Thats where i'll mostly be using it, so does anyone have any experience?
Also what spares would i need to stock up most on.
Thanks
My brother already has a speedway PAL barracuda that he got a while ago, but doesnt dare to use it.
I'm currently considering getting one cos they look like real nice cars. Just wondering though, who well do they go on carpet? Thats where i'll mostly be using it, so does anyone have any experience?
Also what spares would i need to stock up most on.
Thanks
10-06-2003, 10:15 AM
#4823
Originally posted by TRF414WCR
Hi.
My brother already has a speedway PAL barracuda that he got a while ago, but doesnt dare to use it.
I'm currently considering getting one cos they look like real nice cars. Just wondering though, who well do they go on carpet? Thats where i'll mostly be using it, so does anyone have any experience?
Also what spares would i need to stock up most on.
Thanks
Hi.
My brother already has a speedway PAL barracuda that he got a while ago, but doesnt dare to use it.
I'm currently considering getting one cos they look like real nice cars. Just wondering though, who well do they go on carpet? Thats where i'll mostly be using it, so does anyone have any experience?
Also what spares would i need to stock up most on.
Thanks
10-06-2003, 10:29 AM
#4824
Tech Elite
Barracuda from Alex racing
OK Guys;
Now that you've had time to sort out the Barracuda, what are your opinions good or bad.
There are a few of them at the Track and they are doing rather well.
Thanks,
Now that you've had time to sort out the Barracuda, what are your opinions good or bad.
There are a few of them at the Track and they are doing rather well.
Thanks,
Last edited by popsracer; 10-06-2003 at 03:02 PM.
10-06-2003, 11:26 AM
#4825
Tech Initiate
How come i'd need the PAL hubs? do they have extra clearance for 28 and 30mm foams? If i get the R2 where can i get them?
Another thing i was wondering was the flex of the wishbones (or has this been sorted now?) and how they effect the car on carpet.
cheers
Another thing i was wondering was the flex of the wishbones (or has this been sorted now?) and how they effect the car on carpet.
cheers
10-06-2003, 12:37 PM
#4826
Originally posted by TRF414WCR
How come i'd need the PAL hubs? do they have extra clearance for 28 and 30mm foams? If i get the R2 where can i get them?
Another thing i was wondering was the flex of the wishbones (or has this been sorted now?) and how they effect the car on carpet.
cheers
How come i'd need the PAL hubs? do they have extra clearance for 28 and 30mm foams? If i get the R2 where can i get them?
Another thing i was wondering was the flex of the wishbones (or has this been sorted now?) and how they effect the car on carpet.
cheers
10-06-2003, 01:31 PM
#4828
Originally posted by ImGoinRCn
Speedtechrc is the BEST place to get an R2. He also has many aftermarket parts, etc. If you don't see what you are looking for, email Steve and he'll be glad to help you out. He has excellent service.
Speedtechrc is the BEST place to get an R2. He also has many aftermarket parts, etc. If you don't see what you are looking for, email Steve and he'll be glad to help you out. He has excellent service.
10-06-2003, 04:00 PM
#4829
Originally posted by TRF414WCR
How come i'd need the PAL hubs? do they have extra clearance for 28 and 30mm foams? If i get the R2 where can i get them?
Another thing i was wondering was the flex of the wishbones (or has this been sorted now?) and how they effect the car on carpet.
cheers
How come i'd need the PAL hubs? do they have extra clearance for 28 and 30mm foams? If i get the R2 where can i get them?
Another thing i was wondering was the flex of the wishbones (or has this been sorted now?) and how they effect the car on carpet.
cheers
The standard wishbones are very beefy so you're highly unlikely to break them and they don't seem awfully bendy to me. But there are harder ones available if you want all the stiffness you can get for carpet racing.
10-06-2003, 04:39 PM
#4830
Originally posted by TRF414WCR
Another thing i was wondering was the flex of the wishbones (or has this been sorted now?) and how they effect the car on carpet.
cheers
Another thing i was wondering was the flex of the wishbones (or has this been sorted now?) and how they effect the car on carpet.
cheers
the R2 now has much beefier A-arms now.. so there is no fles what so ever...
-Dave