Go Back  R/C Tech Forums > General Forums > Nitro Off-Road
Hyper 8 Pro's Mach 21 engine issue.. >

Hyper 8 Pro's Mach 21 engine issue..

Community
Wiki Posts
Search

Hyper 8 Pro's Mach 21 engine issue..

Thread Tools
 
Search this Thread
 
Old 06-01-2007, 04:55 AM
  #1  
Tech Adept
Thread Starter
 
Join Date: Feb 2007
Posts: 146
Default Hyper 8 Pro's Mach 21 engine issue..

hey,

Just came back from a run-in of my Mach 21 engine..Got a query to ask:

Noticed that after a tank of nitro, realised that my engine will often emit a loud pitch sound, sounds like a high idling sound, it's tends to goes back to normal idling sounds a few seconds after a complete stop of the buggy..

Is this normal? if not what could be the problem.

Pls advise and thanks in advance.

regards.
viperviper is offline  
Old 06-01-2007, 10:48 AM
  #2  
Tech Elite
iTrader: (22)
 
Jason Halvorson's Avatar
 
Join Date: Apr 2007
Location: Grand Forks ND
Posts: 3,955
Trader Rating: 22 (100%+)
Default

my novarossi P5X does this....i havent had any problems with the engine, and i have over 2 gallons of 30% through it...
Jason Halvorson is offline  
Old 06-01-2007, 06:34 PM
  #3  
Tech Adept
Thread Starter
 
Join Date: Feb 2007
Posts: 146
Default

Originally Posted by Jason Halvorson
my novarossi P5X does this....i havent had any problems with the engine, and i have over 2 gallons of 30% through it...

In this case, it should be normal then.. thanks Jason.
viperviper is offline  
Old 06-01-2007, 11:33 PM
  #4  
Tech Elite
iTrader: (22)
 
Jason Halvorson's Avatar
 
Join Date: Apr 2007
Location: Grand Forks ND
Posts: 3,955
Trader Rating: 22 (100%+)
Default

Originally Posted by viperviper
In this case, it should be normal then.. thanks Jason.
well i dont know if its normal, but just hasnt caused any problems for me....
Jason Halvorson is offline  
Old 06-03-2007, 02:51 AM
  #5  
Tech Elite
iTrader: (33)
 
MadRacer's Avatar
 
Join Date: Aug 2005
Location: Australia
Posts: 2,863
Trader Rating: 33 (100%+)
Default

Change to a OS P3 plug will have to retune i say.
Never have that problem with myn.
MadRacer is offline  
Old 06-03-2007, 07:08 AM
  #6  
Tech Adept
Thread Starter
 
Join Date: Feb 2007
Posts: 146
Default

Originally Posted by MadRacer
Change to a OS P3 plug will have to retune i say.
Never have that problem with myn.
hey MadRacer, I'm using OS P6 (Hot).

1. Can P3 fit into this turbo engine? ie is this P3 plug a turbo glow plug?

2. Btw, u hv experience this similar problem with P6 plug?

3. Will this do harm to the engine if i continue to use the P6 plug?

4. Do u know what is the cause of this problem, any reasons or explainations?

Pls advise. thanks.
viperviper is offline  
Old 06-03-2007, 10:18 PM
  #7  
Tech Elite
iTrader: (33)
 
MadRacer's Avatar
 
Join Date: Aug 2005
Location: Australia
Posts: 2,863
Trader Rating: 33 (100%+)
Default

Originally Posted by viperviper
hey MadRacer, I'm using OS P6 (Hot).

1. Can P3 fit into this turbo engine? ie is this P3 plug a turbo glow plug?

2. Btw, u hv experience this similar problem with P6 plug?

3. Will this do harm to the engine if i continue to use the P6 plug?

4. Do u know what is the cause of this problem, any reasons or explainations?

Pls advise. thanks.
Cant explain why it does it but i have had no issue like that useing a p3 plug.
Yes its Turbo or it wouldnt fit in mine either.
The P3 is a hotter plug and comes standard with the OS V SPEC. It is a very popular plug in off road. Being hotter it has better idle characteristics .Unfortunately mine has died . Good luck.
MadRacer is offline  
Old 06-04-2007, 05:31 AM
  #8  
Tech Adept
Thread Starter
 
Join Date: Feb 2007
Posts: 146
Default

Originally Posted by MadRacer
Cant explain why it does it but i have had no issue like that useing a p3 plug.
Yes its Turbo or it wouldnt fit in mine either.
The P3 is a hotter plug and comes standard with the OS V SPEC. It is a very popular plug in off road. Being hotter it has better idle characteristics .Unfortunately mine has died . Good luck.

Thanks. Will get the P3 glow to try it out.
viperviper is offline  

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.