TLR 8IGHT E 3.0 THREAD
#1876
sad to say i just built my 3.0 and cant run 1/8 anymore. brand new car never had any electronics or anything put into it. check out the thread thanks
http://www.rctech.net/forum/r-c-item...3-0-buggy.html
http://www.rctech.net/forum/r-c-item...3-0-buggy.html
#1878
Tech Prophet
iTrader: (34)
http://www.deracing.net/store/index....product_id=223
#1879
TLRacing
#1880
Tech Elite
iTrader: (27)
#1881
Tech Regular
What size pinion would you start out with a Tekin 2050 T8 on a medium outdoor track? Thanks
#1883
Tech Regular
Thanks XXXDad I am going to turn the motor down got a good price on it, but am going to buy a 1900 for it.
#1884
Nothing wrong with the 2050. When I picked mine up, I was originally going to get the 1900KV motor, but they were out of stock. I run a 13T pinion.
#1885
Tech Master
iTrader: (10)
DE makes guards for the SCTE that will work on that since the arms are the same.
http://www.deracing.net/store/index....product_id=223
http://www.deracing.net/store/index....product_id=223
I am looking to figure out how well the stock 8-E 3.0 body will fit the MIP Pro8 conversion, so I'm looking for either the measurement of the width of the body or the width of the chassis with the plastic side guards installed.
Thanks.
#1886
Tech Prophet
iTrader: (34)
Sorry I am calling the side plastic guards "mud guards" I have those DE A-arm mud guards on already.
I am looking to figure out how well the stock 8-E 3.0 body will fit the MIP Pro8 conversion, so I'm looking for either the measurement of the width of the body or the width of the chassis with the plastic side guards installed.
Thanks.
I am looking to figure out how well the stock 8-E 3.0 body will fit the MIP Pro8 conversion, so I'm looking for either the measurement of the width of the body or the width of the chassis with the plastic side guards installed.
Thanks.
#1887
CHARGER/POWER SUPPLY
I just finished putting together my new Losi 8e. I installed a Gen2 RX8 and T8 1900 kv motor with a PROMATCH 4S battery, and was wondering what charger and power supply someone might recommend? I am looking at a Hyperion charger but would need a 24 volt power supply. What are some opinions.
#1888
I just finished putting together my new Losi 8e. I installed a Gen2 RX8 and T8 1900 kv motor with a PROMATCH 4S battery, and was wondering what charger and power supply someone might recommend? I am looking at a Hyperion charger but would need a 24 volt power supply. What are some opinions.
http://www.allerc.com/hyperion-eos-7...ut-p-6176.html
I'd recommend either that Hyperion or a FMA Powerlab 6 for a single channel charger. For a dual channel charger either the FMA PL8 Duo charger or the Junsi iCharger 308Duo.
As for a power supply, just build one out of two server power supplies and wire them in series. Cost $50 or less.
#1889
Tech Master
iTrader: (65)
I just finished putting together my new Losi 8e. I installed a Gen2 RX8 and T8 1900 kv motor with a PROMATCH 4S battery, and was wondering what charger and power supply someone might recommend? I am looking at a Hyperion charger but would need a 24 volt power supply. What are some opinions.
#1890
Tech Elite
iTrader: (33)
I just finished putting together my new Losi 8e. I installed a Gen2 RX8 and T8 1900 kv motor with a PROMATCH 4S battery, and was wondering what charger and power supply someone might recommend? I am looking at a Hyperion charger but would need a 24 volt power supply. What are some opinions.
http://m.ebay.com/sch/strickproducts...?isRefine=true