1/10 R/C F1's...Pics, Discussions, Whatever...
#4713
Tech Fanatic
iTrader: (18)
I tried finding one like that as well, and ended up building my own.
-5mm flashing led
-1 servo wire extension
- scrap piece of 3/8ths acrylic
Solder the wire to the led, shape acrylic to fit in the slot of the wing, drill out acrylic for LED, insert led to acrylic block, wedge into wing, route wire to receiver. I used my vinyl cutter to produce a piece of vinyl with the grid of multiple holes for the light to shine through. Done. I should add that this was done for under $7.00.
Uploaded with ImageShack.us
Uploaded with ImageShack.us
-5mm flashing led
-1 servo wire extension
- scrap piece of 3/8ths acrylic
Solder the wire to the led, shape acrylic to fit in the slot of the wing, drill out acrylic for LED, insert led to acrylic block, wedge into wing, route wire to receiver. I used my vinyl cutter to produce a piece of vinyl with the grid of multiple holes for the light to shine through. Done. I should add that this was done for under $7.00.
Uploaded with ImageShack.us
Uploaded with ImageShack.us
#4714
Yes, that should work as well.
#4720
Crazy idea BP, I am working on making a 1/10 Touring Car Safety Car body for our races. Could it be possible to make a decal sheet that looks like the safety car. How cool would that be to have a safety car come out midway through the race to tighten the field back up. With lights and all.
#4721
Tech Elite
iTrader: (24)
Crazy idea BP, I am working on making a 1/10 Touring Car Safety Car body for our races. Could it be possible to make a decal sheet that looks like the safety car. How cool would that be to have a safety car come out midway through the race to tighten the field back up. With lights and all.
#4722
Exactly BP. Just the hood and side decals. Great let me know when you have time.