Who sells 1/10 nascar bodies/decals?
07-28-2009, 07:07 PM
#2
As far as I remember a few years ago the sponsorship decals were going to have to pay licencing fees.Anyway the guys going those decal quit.I've got a new slixx set of Davey Allison still in the bag.Either that or go to a sign shop or get the equipment I don't know what equipment you need but someone out there can tell you.
07-28-2009, 09:23 PM
#3
As far as I remember a few years ago the sponsorship decals were going to have to pay licencing fees.Anyway the guys going those decal quit.I've got a new slixx set of Davey Allison still in the bag.Either that or go to a sign shop or get the equipment I don't know what equipment you need but someone out there can tell you.
07-28-2009, 09:49 PM
#4
I know how you feel. I would love to get some redbull nascar decals, but it's almost impposible to find a store that sells the. The best way to get your decals, is to buy a vinyl cutter, and get the logos from http://www.brandsoftheworld.com. It isn't cheap, but over time, it pays for itself.
07-28-2009, 10:16 PM
#5
I know how you feel. I would love to get some redbull nascar decals, but it's almost impposible to find a store that sells the. The best way to get your decals, is to buy a vinyl cutter, and get the logos from http://www.brandsoftheworld.com. It isn't cheap, but over time, it pays for itself.
Though, even if I do find the decals I am not sure I'm will to folk $30+ for them.
07-29-2009, 02:58 PM
#7
Mike has Jack Daniels decals, Amp/National guard decals and well at Earnhardt senior decals.
One down one to go...we are now looking for either Carl Edwards, Jimmy Johnson, Matt Kenseth, or Jeff Burton decals.
08-02-2009, 06:37 PM
#10
Tech Apprentice
iTrader: (5)
I'm a bad gauge of how long it takes to build/paint bodies, because I am generally impatient and rush things... but it turns out that my rush method usually yields halfway decent results, so they look ok.
BTW here is the completed Dale Jr #88 Amp Energy body for the Slash which I wrapped up this weekend. This one took a lot longer as it involved masking 3 primary colors (metallic green, pearl white, black) plus 2 different backing coats, plus a bad experience with Pactra's "Pearl White" color which is super translucent, so I had to run out to pick up a Tamiya White to put behind it.
This was all done with rattle-can spray paint.
The #88 decal set is from Mike's Decals.
BTW here is the completed Dale Jr #88 Amp Energy body for the Slash which I wrapped up this weekend. This one took a lot longer as it involved masking 3 primary colors (metallic green, pearl white, black) plus 2 different backing coats, plus a bad experience with Pactra's "Pearl White" color which is super translucent, so I had to run out to pick up a Tamiya White to put behind it.
This was all done with rattle-can spray paint.
The #88 decal set is from Mike's Decals.
08-02-2009, 07:57 PM
#11
There are high quality decals available from Bruce Patto @ http://members.optushome.com.au/pattosplace/home.html
He is not shipping until the end of September but his stuff is first rate. Some have said a bit expensive but considering the time required to do your own it seems fair to me.
He is not shipping until the end of September but his stuff is first rate. Some have said a bit expensive but considering the time required to do your own it seems fair to me.
... Don't make any mistakes while applying them!
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
