BANZAI Motors
01-14-2008, 07:09 AM
#7636
Mom, Did you watch the Chilli Bowl on pay-perview? If not, you missed some AWESOME midget racing 
Gardners bicycle all the way around 3 and 4 then set it down to wheelie down the front stretch was friggin sweet! After a horrible day of rc racing that totaly made the day!
Gardners bicycle all the way around 3 and 4 then set it down to wheelie down the front stretch was friggin sweet! After a horrible day of rc racing that totaly made the day!I watched it. There was some great action, wasn't there
The B main with Stewart was good too 
01-14-2008, 08:20 AM
#7637
Everytime I want to place an order, something comes up that requires my $$. (Stupid bills!!)
To the current drivers, is there a preference for which motors work better in offroad applications? Onroad? Im looking to get at least one stock motor, a 19t and perhaps a mod, and maybe a spare mod arm. Im running my original RC10 in our Vintage class and my old Banzai stock motor is still kicking ass. Im likely going to race 19t buggy and 4wd mod. In talking with some other drivers here, they say that I don't need a crazy power mod, most people here are using 15t and up. Any Banzai drivers running 4wd? What are you running?
Mom- Can't wait to see the new gear! No baby yet, but we're down to the last 3 wks or so till he is here.
Any Banzai drivers interested in coming N, we have a really great race happening later this month. http://www.amainraceway.com/PDF/Wint...age%202008.pdf
MOmo
To the current drivers, is there a preference for which motors work better in offroad applications? Onroad? Im looking to get at least one stock motor, a 19t and perhaps a mod, and maybe a spare mod arm. Im running my original RC10 in our Vintage class and my old Banzai stock motor is still kicking ass. Im likely going to race 19t buggy and 4wd mod. In talking with some other drivers here, they say that I don't need a crazy power mod, most people here are using 15t and up. Any Banzai drivers running 4wd? What are you running?
Mom- Can't wait to see the new gear! No baby yet, but we're down to the last 3 wks or so till he is here.
Any Banzai drivers interested in coming N, we have a really great race happening later this month. http://www.amainraceway.com/PDF/Wint...age%202008.pdf
MOmo
01-14-2008, 08:26 AM
#7638
I recommend the CO27 Blue stock motor. The KD for the 19T and for 4wd mod. Depends on the track. I have been running a 13X4 for a little while now in 4wd and like it a lot for most tracks. Todays bats have so much power you do not need low turn mods to go super fast.
01-14-2008, 10:27 AM
#7639
TEAM DRIVERS: Email me your "clothing" order now and I will
send you back an email with prices and shipping.
I will be at Pegasus Saturday to deliver stuff and
Scott will be at Hot Rod's. So, if you want either of us
to bring stuff, tell me where you'll be so I can sort out
the orders!
Customers: You can begin emailing your orders tomorrow!!
Hoodies, and also sweatshirts no hood, shirts, and hats!!
send you back an email with prices and shipping.
I will be at Pegasus Saturday to deliver stuff and
Scott will be at Hot Rod's. So, if you want either of us
to bring stuff, tell me where you'll be so I can sort out
the orders!
Customers: You can begin emailing your orders tomorrow!!
Hoodies, and also sweatshirts no hood, shirts, and hats!!
01-14-2008, 12:52 PM
#7642
Testing 
01-14-2008, 12:56 PM
#7643
Looking good! Gotta git me sum o dem.
01-14-2008, 01:20 PM
#7645
Thanks guys! The grey shirts are a little more grey than
what showed up in the pictures!
I'm keeping up with the email orders, I see a lot of team
guys read the forum, just don't post, because their orders
are flying in too!!
what showed up in the pictures!
I'm keeping up with the email orders, I see a lot of team
guys read the forum, just don't post, because their orders
are flying in too!!
01-14-2008, 01:42 PM
#7647
Looks good.
HOPEFULLY with this coming paycheck I'll be putting in an order.
MOmo
HOPEFULLY with this coming paycheck I'll be putting in an order.
MOmo
01-14-2008, 01:44 PM
#7648
It is difficult for me to keep up with the ever changing
Cactus rules, so I will post this here, and again on our
web-site.
We were one of the original winders for the Oval ARCOR
19t hand-wound, adjustable timing motors. We have had them
for YEARS, both Epic based and CP based. Turbo Joe can
attest to the fact he bought a CP based several weeks ago.
They have been available to the public for years, all you have to
do is ask, as Turbo did.
The rules now state on the SRS site they must be available by
TODAY, well, they have been.
SOOOOOOOOOOOOOO
"The SRS Spec 19t," adjustable timing, CP based, handwound motors
are AVAILABLE and have been FOR YEARS!!!!!!!!!!
We will put that on the site today, and I believe this is a public
announcement here on R/C Tech.
Anyone who wants to do so, may post what I just wrote on the
Cactus thread!
Cactus rules, so I will post this here, and again on our
web-site.
We were one of the original winders for the Oval ARCOR
19t hand-wound, adjustable timing motors. We have had them
for YEARS, both Epic based and CP based. Turbo Joe can
attest to the fact he bought a CP based several weeks ago.
They have been available to the public for years, all you have to
do is ask, as Turbo did.
The rules now state on the SRS site they must be available by
TODAY, well, they have been.
SOOOOOOOOOOOOOO
"The SRS Spec 19t," adjustable timing, CP based, handwound motors
are AVAILABLE and have been FOR YEARS!!!!!!!!!!
We will put that on the site today, and I believe this is a public
announcement here on R/C Tech.
Anyone who wants to do so, may post what I just wrote on the
Cactus thread!
01-14-2008, 01:44 PM
#7649
Judi,
Jr is 2nd fast in the AM testing at Daytona!
I've had a few of the adjustable 19T over the years!
Jr is 2nd fast in the AM testing at Daytona!
I've had a few of the adjustable 19T over the years!
