Ginsu

iTrader: (9)

Really looking forward to it. These cars look like a blast!!!!

billjacobs

iTrader: (65)

The xray t2 006/007 diffs fit perfectly. There was a slight change in the 008/009/t3 diffs (they are offset differently.)

New, the diffs are about $60 (outrageous.) Try to find used t2/007 diffs.

hotdognobun

iTrader: (32)

I know the price is still high after all these years. When using the Xray Diffs are you also using their gears or do you have to use the atomic ones?

tcdrvr2

iTrader: (88)

Has anyone found replacement ball cups and ball studs that will work for this car? It doesn't seem to take much of a hit to pop the factory cups loose and one piece ball studs for the c-hubs and uprights would be better for me.

Yellowtaro

iTrader: (54)

Tamiya's will work.

cyclone x

iTrader: (3)

they are the same because both cars have the same internal

Ginsu

iTrader: (9)

what are you guys doing for tires? I ran some Tamiya mini tires and the car was just drifting. I need some good tires for the birds......RCmart was out of most of the other makes. I am at a loss what tires and where to buy them in time for the race. Any ideas?

abailey21

iTrader: (37)

Ginsu, I have mini take off RP30's in the back room, also some inserts (if they work), I think speedtech has some as well?

tcdrvr2

iTrader: (88)

I bought some of these, seem to be about the best deal.

http://shopping.rcmodel.hk/product_i...ducts_id=16065

gashuffer

iTrader: (48)

Are the TRF M-chassis shocks a direct fit for this chassis? I am sort of torn on which car to get. This one or the Genetic. I have a set of TRF shocks laying around, but this is not my deciding factor

hotdognobun

iTrader: (32)

I've seen them on the genetics but don't know if the driver use tamiya ball cups or stock. I use Tamiya on my vm2 and they feel 200% smoother than stock

luketob

iTrader: (2)

sup guys...

interested in getting an extra VM2...perhaps for a back up car? I'm selling mine

http://www.rctech.net/forum/r-c-item...ttery-etc.html

rai913

iTrader: (2)

Anybody still running these? I just picked up hotdononbun's atomic. Any suggestions on setup,tires, etc...?

Atomic-USA

What surface do you run on? What tires are allowed at your track?

Snowbird winner setup is attached

MikeXray

iTrader: (73)

Are there any good 210mm bodies that don't end up $40 shipped? is their gold molded into these things?