afm

what´s the ideal torque/speed in steering and acc/brake servos for this car.

AFM

1966ss

iTrader: (13)

Selling my gt roller. Big parts lot. Motor. Pipe. New bodies.

http://www.rctech.net/forum/r-c-item...motor-etc.html

Make offers. Will trade for srx-mm

spooky 1

iTrader: (1)

Look for at least 200oz on steering and 100oz or more for throttle.

xscape

I am using a 25kg for throttle /brake and 30kg for steering.....

xscape

When going into tight corners it tends to understreer. What can I do to help counter this?

spooky 1

iTrader: (1)

Use the 0 degree caster blocks or stiffen the rear set to plant the front.

xscape

now it oversteer alot. think have to do some other settings and trimming....

Thanks.

spooky 1

iTrader: (1)

Well, you got rid of the understeer.

Larus

Suggestion

Increase the front drop (that worked for me)
go thicker on front oil (Still not tested but i wil put one million on front)

that's my 2 cent

British Menace

Sounds as though you have an imbalance in the front and rear roll angles of the car.

Regards
BM

lagcisco

iTrader: (40)

About to build a new cobra gt. Should I build it with the kit setup or is there a better setup starting point?

vctr1

iTrader: (16)

Cisco,
use the one from Paolo at Juliet, thats a good start for GLARCC:
http://www.serpent.com/product/600040/setups/

victor

nexxus

iTrader: (315)

Is there much of a change needed in the setup when going from GRP tyres to Sweeps? LHS has gotten into the powers that be at the club and we have to run only tyres that they sell to have points counted.

spooky 1

iTrader: (1)

The tire diameter will affect ride height and camber and toe. You'll need to reset those.

DRRC

iTrader: (59)

https://www.youtube.com/watch?v=x5rg...ature=youtu.be

All Serpent Cobra GTs with Paolo setup
Always reliable and as you can see always fun lol