Team Associated TC3 ... and more
04-10-2010, 03:09 PM
#1
Team Associated TC3 ... and more
Team Associated TC3 Rally/On Road
This is a clean and well-maintained TC3 roller with 200mm wide arms installed. Also includes all Associated Rally Conversion Kit parts necessary to run as a full rally car or 190mm or 200mm on road car.
Package includes rolling chassis with 200mm arms, longer CVDs installed. It also includes the following:
Futaba servo
Reedy TI 13x2 motor
Reedy 27 motor
Nitro TC3 steering rack (doesn’t clog up)
Titanium turnbuckles
Stainless hardware
Nerf bars
HPI rally tires mounted on HPI 5-spoke wheels
HPI Pirelli rally tires mounted on HPI wheels (good for hard packed dirt and tarmac)
Associated rally tires on Associated wheels
Extra un-mounted HPI rally tires (4)
190mm arms and CVDs,
RPM front bumper
Rally kit parts including longer shock shafts, rally front bumper, rally springs.
4 extra shocks
Used HPI Subaru rally body
$110 shipped (lower 48)
This is a clean and well-maintained TC3 roller with 200mm wide arms installed. Also includes all Associated Rally Conversion Kit parts necessary to run as a full rally car or 190mm or 200mm on road car.
Package includes rolling chassis with 200mm arms, longer CVDs installed. It also includes the following:
Futaba servo
Reedy TI 13x2 motor
Reedy 27 motor
Nitro TC3 steering rack (doesn’t clog up)
Titanium turnbuckles
Stainless hardware
Nerf bars
HPI rally tires mounted on HPI 5-spoke wheels
HPI Pirelli rally tires mounted on HPI wheels (good for hard packed dirt and tarmac)
Associated rally tires on Associated wheels
Extra un-mounted HPI rally tires (4)
190mm arms and CVDs,
RPM front bumper
Rally kit parts including longer shock shafts, rally front bumper, rally springs.
4 extra shocks
Used HPI Subaru rally body
$110 shipped (lower 48)
Last edited by jhberger; 04-12-2010 at 02:43 PM.
04-10-2010, 03:12 PM
#2
Another TC3 RCGT
Team Associated TC3 RCGT Rolling chassis and New GT-R Body
Well-maintained roller with extra “swiss cheese” lightened chassis, JR servo, RPM front bumper, FT motor mount and heatsink, threaded aluminum shocks, 2 slightly used HPI x-patterns on white T37 wheels, 2 new HPI x-patterns,0mm and 3mm offset white T37 wheels, brand new painted Nissan GT-R body
SOLD
Well-maintained roller with extra “swiss cheese” lightened chassis, JR servo, RPM front bumper, FT motor mount and heatsink, threaded aluminum shocks, 2 slightly used HPI x-patterns on white T37 wheels, 2 new HPI x-patterns,0mm and 3mm offset white T37 wheels, brand new painted Nissan GT-R body
SOLD
Last edited by jhberger; 04-19-2010 at 12:08 PM.
04-10-2010, 03:15 PM
#3
Mucho TC3 Spares
Big Lot of Team Associated TC3 spares
Large selection of useful spares, many are new including,
Front and rear arms,
Front and rear shock towers,
0°, 2°, 4° caster blocks,
front and rear hubs,
outdrives (composite and steel),
sway bars,
trans cases,
battery strap,
carbon drive shaft,
assorted stainless and blue aluminum hardware, hinge pins,
front and rear hinge pin mounts in all geometries,
parts box. Pretty much everything you’ll need to tune and maintain a TC3.
SOLD
Smaller Lot of Team Associated TC3 spares
Smaller selection of useful spares, many are new including, arms, shock towers, caster blocks, front and rear hubs, outdrives (composite and steel), trans cases, assorted stainless and blue aluminum hardware, hinge pins, front and rear hinge pin mounts in various geometries, parts box. Pretty much everything you’ll need to tune and maintain a TC3.
$25 Shipped
Large selection of useful spares, many are new including,
Front and rear arms,
Front and rear shock towers,
0°, 2°, 4° caster blocks,
front and rear hubs,
outdrives (composite and steel),
sway bars,
trans cases,
battery strap,
carbon drive shaft,
assorted stainless and blue aluminum hardware, hinge pins,
front and rear hinge pin mounts in all geometries,
parts box. Pretty much everything you’ll need to tune and maintain a TC3.
SOLD
Smaller Lot of Team Associated TC3 spares
Smaller selection of useful spares, many are new including, arms, shock towers, caster blocks, front and rear hubs, outdrives (composite and steel), trans cases, assorted stainless and blue aluminum hardware, hinge pins, front and rear hinge pin mounts in various geometries, parts box. Pretty much everything you’ll need to tune and maintain a TC3.
$25 Shipped
Last edited by jhberger; 04-19-2010 at 12:08 PM.
04-12-2010, 02:54 PM
#6
bump.. for some killer deals. can not believe they are still here. good luck man.
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
