New X-10 4wd Offroad car from tenth technology !!!
05-30-2006, 07:14 AM
#151
try going to the link at post #129 and you'll be able to get details.... hopefully.
05-30-2006, 10:07 AM
#152
Originally Posted by tradhunt
Ya, sounds like wrong tire choice and bad suspension set-up....
I run on a hard packed track it groove's sometimes.....I usually run taper pin's I'm trying out the Panther's and the Proline Inside Job.'s both seem to be pretty good tire's.
The proline's are really nice.....
We have some pretty good jumps. one is really big. maybe not quite the ski jump you guy's have but pretty close.
I run on a hard packed track it groove's sometimes.....I usually run taper pin's I'm trying out the Panther's and the Proline Inside Job.'s both seem to be pretty good tire's.
The proline's are really nice.....
We have some pretty good jumps. one is really big. maybe not quite the ski jump you guy's have but pretty close.
It was more of a dry, dusty track with a groove only because of the 200+ cars running on it.
The best tires were holeshots m3. I think the guy was running larger pin tires because they were watering but then stopped.
05-30-2006, 12:24 PM
#153
Originally Posted by mangemutt
can you buy the x10 and xrs straight off the ttech website?
im thinking ill buy an xrs and a couple of spares packs.
what comes in the spares pack?
im thinking ill buy an xrs and a couple of spares packs.
what comes in the spares pack?
1x Lower front suspension arm
1x Upper front suspension arm
1x Lower rear suspension arm
1x Upper rear suspension arm
2x Front Uprights
2x Rear Uprights
2x Front wheels
2x Rear wheels
4x Standard ball joints
4x Bullet ball joints
05-30-2006, 04:43 PM
#154
Tech Fanatic
iTrader: (20)
Hey Mangemutt,
Yes you can get it all right from TTech's site..... The XRS's won't be out for 2-3 week's from what I was told. And Cartmen got the spare's package right....You might also want to look into getting the center one-way shaft kit if you want to run a one-way TTech dosent offer a one-way diff. but it's a pretty neet setup you can adjust it with o-rings to get how much one-way action you want.
OH, ok I see Killer....ya he was prob. running like a step pin tire or something huh..... Ya the holeshot's would of been the way to go.... My track I use mostly Pink taper's.... at least on my BJ4's they work really good. The holeshots don't work very good it seem's with that car. But on my X10 they all work really good...i even tried to mess with the suspension on the BJ4's and they do do better but just something about the X10.
If anyone would like to see how the one-way works...or if you want to see the X10 with a bit more close up shot's.....Feel free to PM me with youre E-mail addy. and what you'd like a pic. of....I'll be more then happy to send anyone some.....
Yes you can get it all right from TTech's site..... The XRS's won't be out for 2-3 week's from what I was told. And Cartmen got the spare's package right....You might also want to look into getting the center one-way shaft kit if you want to run a one-way TTech dosent offer a one-way diff. but it's a pretty neet setup you can adjust it with o-rings to get how much one-way action you want.
OH, ok I see Killer....ya he was prob. running like a step pin tire or something huh..... Ya the holeshot's would of been the way to go.... My track I use mostly Pink taper's.... at least on my BJ4's they work really good. The holeshots don't work very good it seem's with that car. But on my X10 they all work really good...i even tried to mess with the suspension on the BJ4's and they do do better but just something about the X10.
If anyone would like to see how the one-way works...or if you want to see the X10 with a bit more close up shot's.....Feel free to PM me with youre E-mail addy. and what you'd like a pic. of....I'll be more then happy to send anyone some.....
01-31-2007, 06:47 AM
#155
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
