Erevo,MambaMonster,DX3S,Spektrum,SMC Lipo, Lipo Charger
10-16-2009, 04:01 AM
#1
Erevo,MambaMonster,DX3S,Spektrum,SMC Lipo, Lipo Charger
I can't beleive i'm doing this but i really need the quick cash, i'm not getting out of the hobby and i'm not going anywhere
NO TRADES, NO TRADES, NO TRADES, NO TRADES!
E Revo Brushless Edition Roller- 175 shipped
Rolling Chassis w/ both servos
-Losi Zombiemaxx Tires on Kyosho Solids
- RPM White Front Arms
- Aluminum Rear Arms (one lower arm is alittle pinched but not bent, only cosmetic)
- Lunsford Titanium Rocker Post in front
- Proline Wing
- Nitro Revo Big Bumpers
- Aluminum Rocker Arms
- 2 bodies (stock and nitro revo)
-extra parts (springs,arms, pushrods,carriers, etc)
Castle 2200kv and Mamba Monster- SOLD
Works Excellent, motor has cosmetic scuffs on top of can from rolling without a body on once. Purely cosmetic, mamba monster wired for dual packs, switch went bad on it so wires are shrink wrapped together.
SMC Lipos 2x 2S 50c 5200mah- SOLD
Brand New, TRX plugs
Spektrum DX3S and SR3000- SOLD
DX3S works perfect, still has plastic on screen, minor scuffs on case.
SR3000- honestly may or may not work. was having problems with servos twitching, could have been the receiver, may of just needed rebinded. Never checked. So this is being thrown in with the controller
Onyx 230 Lipo charger- SOLD
BRAND NEW- just got from towerhobbies 2 days ago, only took it out of box. never even plugged in.
Blinky Balancer- SOLD
BRAND NEW, also just received from tower, only took it out of the pack, never even plugged into a battery.
Revo 3.3 Goodie Bag- SOLD
2 tanks, ez start assembly, with 2 motors, battery,wand, wires, transmission w/ opti drive module, arms, brand new aluminum air filter, bellcrank, motor mount, hobbico 4 way wrench, random 3.3 tools.
Spektrum Telemetry Module and Battery Lead- SOLD
Brand New in Packs, telemetry module for dx3s and battery lead to monitor main pack volts.
NO TRADES, NO TRADES, NO TRADES, NO TRADES!
E Revo Brushless Edition Roller- 175 shipped
Rolling Chassis w/ both servos
-Losi Zombiemaxx Tires on Kyosho Solids
- RPM White Front Arms
- Aluminum Rear Arms (one lower arm is alittle pinched but not bent, only cosmetic)
- Lunsford Titanium Rocker Post in front
- Proline Wing
- Nitro Revo Big Bumpers
- Aluminum Rocker Arms
- 2 bodies (stock and nitro revo)
-extra parts (springs,arms, pushrods,carriers, etc)
Castle 2200kv and Mamba Monster- SOLD
Works Excellent, motor has cosmetic scuffs on top of can from rolling without a body on once. Purely cosmetic, mamba monster wired for dual packs, switch went bad on it so wires are shrink wrapped together.
SMC Lipos 2x 2S 50c 5200mah- SOLD
Brand New, TRX plugs
Spektrum DX3S and SR3000- SOLD
DX3S works perfect, still has plastic on screen, minor scuffs on case.
SR3000- honestly may or may not work. was having problems with servos twitching, could have been the receiver, may of just needed rebinded. Never checked. So this is being thrown in with the controller
Onyx 230 Lipo charger- SOLD
BRAND NEW- just got from towerhobbies 2 days ago, only took it out of box. never even plugged in.
Blinky Balancer- SOLD
BRAND NEW, also just received from tower, only took it out of the pack, never even plugged into a battery.
Revo 3.3 Goodie Bag- SOLD
2 tanks, ez start assembly, with 2 motors, battery,wand, wires, transmission w/ opti drive module, arms, brand new aluminum air filter, bellcrank, motor mount, hobbico 4 way wrench, random 3.3 tools.
Spektrum Telemetry Module and Battery Lead- SOLD
Brand New in Packs, telemetry module for dx3s and battery lead to monitor main pack volts.
Last edited by CBHVR6; 10-20-2009 at 02:58 PM.
10-16-2009, 07:11 PM
#11
Are all the sensors included with the telemetry kit?