Losi XXX-S
#2236
Tech Adept
YokGuy:
Thanks for the response. Nope the spur gear and adapter are one piece.
Joe
Thanks for the response. Nope the spur gear and adapter are one piece.
Joe
#2237
Tech Elite
Yokomojo
Check how true the stock spur is. If it has alot of runout it'll rub on the white tensioner pulley.
For those using the red Trinity adapter, you can also use RRP ultra machine spurs. They are 1/3 thinner than stock. If you still hear rubbing check the button head screw that holds the tensioner pulley to the adjuster plate. The washer that we were told to put on before the screw is not really necessary. The head of the button head screw is big enough to hold the bearing in place. Leaving the washer out will give you enough room for the spur to clear the head.
Check how true the stock spur is. If it has alot of runout it'll rub on the white tensioner pulley.
For those using the red Trinity adapter, you can also use RRP ultra machine spurs. They are 1/3 thinner than stock. If you still hear rubbing check the button head screw that holds the tensioner pulley to the adjuster plate. The washer that we were told to put on before the screw is not really necessary. The head of the button head screw is big enough to hold the bearing in place. Leaving the washer out will give you enough room for the spur to clear the head.
#2238
Tech Rookie
trinity bodies
anyone got any info on the new trinity stratus? i wanted to order andy's/yok stratus, but discovered that trinity has acquired andy's. steve at speectech says that yok is makin a body, but wont be stateside for a while. any insight?
joe.
joe.
#2239
Tech Adept
Sydewynder:
Found the problem. Front end was using Associated 4 degree carriers. CVDs are slighly bent and rubbing in inside of carrier - previous owner didn't take out enough material to provide clearance for warped CVD.
Thanks,
Joe
Found the problem. Front end was using Associated 4 degree carriers. CVDs are slighly bent and rubbing in inside of carrier - previous owner didn't take out enough material to provide clearance for warped CVD.
Thanks,
Joe
#2240
Tech Apprentice
blue is better
Stefan that car is ugly man gaaaahhh.. now finish my shocks so i can test thursday J/K bro.... keep up the good work. Im going to try somethings Thursday see if i can gain a few more tenths. You goign to Columbia Sunday?
#2241
Cory,
your shocks are done, I'll drop them off at the shop tomorrow around lunch.
#2242
Okay, I know this has been asked, and I even answered the question once with a pic from Mark Dawson's site. Anyway, Mark pulled the pics of his car down so I don't know where to mount this power capicator for the TC2 ESC. Anyone got any pointers?
Thanks,
Jits
Thanks,
Jits
#2243
Tech Apprentice
good deal, ill snaggum tomorrow. Thanks again. Ill post some pics so others can see your handy work.
#2244
Originally posted by JitsuGuy
Okay, I know this has been asked, and I even answered the question once with a pic from Mark Dawson's site. Anyway, Mark pulled the pics of his car down so I don't know where to mount this power capicator for the TC2 ESC. Anyone got any pointers?
Thanks,
Jits
Okay, I know this has been asked, and I even answered the question once with a pic from Mark Dawson's site. Anyway, Mark pulled the pics of his car down so I don't know where to mount this power capicator for the TC2 ESC. Anyone got any pointers?
Thanks,
Jits
#2245
#2246
#2247
Good luck and happy racing!
#2248
Originally posted by JitsuGuy
Okay, I know this has been asked, and I even answered the question once with a pic from Mark Dawson's site. Anyway, Mark pulled the pics of his car down so I don't know where to mount this power capicator for the TC2 ESC. Anyone got any pointers?
Thanks,
Jits
Okay, I know this has been asked, and I even answered the question once with a pic from Mark Dawson's site. Anyway, Mark pulled the pics of his car down so I don't know where to mount this power capicator for the TC2 ESC. Anyone got any pointers?
Thanks,
Jits
http://www.shearracing.com/losichassis1.jpg
#2249
mine is back a few pages, also mounted with shoe goo
http://www.rctech.net/forum/showthre...&pagenumber=66
http://www.rctech.net/forum/showthre...&pagenumber=66
#2250
stefan how do you anodize those aluminum parts?