Roberto Falcon

iTrader: (18)

I dont know his setup and doesnt he run mod ? ill just be running stock .

Jon if your setup works for stock too i want to see it if it isnt a problem with you!?


Thanks

Roberto Falcon

iTrader: (18)

Jon if you want to mail it to me mail me it to

Email: [email protected]

Jon Kerr

iTrader: (17)

A setup is a setup. Very rarely would I change the setup just for the motor. Sometimes in mod the car may feel a little more free because of the additional power. But if it's good in mod, it should be just fine for stock. Here's the standard setup we use outdoors on asphalt. I'll probably be running this exact setup to start at the Reedy Race in a few weeks. This is a setup sheet of my own so if there's anything on there that doesn't make since just ask. Like Donny said, you need to follow this setup to a T for starters for it to work right.

IslandBwoy

Do any of you guys have a setup that you find works particularly well on a sealed surface?

speedxl

All of us run pretty much the same set up that we would run in mod for stock. Maybe if anything I would run less toe in on the rear for stock and 19t. If anything set up your car with a faster motor then run what everclass your race in.

I really havent found a track here in florida where I needed anti squat.
I will use anti dive in the front on occassion to get a little extra aggressive corner entry other then that everything stays flat.

Like jon no riser plate up front just a 1mm shim and in the rear the riser plate with 1mm shims on the front and rear pickup points!

speedxl

Paul wynns Portland nationals set up will work at TQ. His set up is at gearchart.com. Or if you'ld like talk to tony padilla he races there everyfriday nite.

IslandBwoy

I'll Take a look at that. I've been running a pretty basic setup that works well but was just wondering if we had one for sealed.

IslandBwoy

Concerning the setups on Gearchart. I see that some of them specify an AE anti roll bar. Where you guys getting these? I have the set sold by schumacher. Are they the same or is their a comprable schu anti roll bar that i can use if i can not find the Associated?

speedxl

That was before shuey released their own. They will work fine. If you insist on running the associated ones, it will require some bending to fit. Any hobby store will carry them. Superior and TQ will have them.

steveM3

I would put it on right before the race and just let it burn off, don't wipe.

protc3

iTrader: (13)

DONT WIPE!!!!!!EEEEEEEWWWWWWWW!!!

what up dude,you racing this weekend?

Jon Kerr

iTrader: (17)

Oh, that's just wrong!

speedxl

Jon these guys in tampa are a little wierd!

Jon Kerr

iTrader: (17)

Most of the people I know in Florida I think are a little off Oh wait, most of my sponsors are in Florida. Nevermind

tmunno

iTrader: (1)

Jon 3 out of 5 live in this area. And yes we are a little off!!!!!!!