Xray T3 2011
#1531
I will continue/finish my build this weekend. Maybe there are some left after the build is complete in any of the other bags?
Anyways, I am in no rush... I will also build a 1/8 electric buggy within the next week or two... so I want to make sure I take my time to do it right.
Also... the ball diff is pre-built. Should I take it apart and make sure it is greased?
Anyways, I am in no rush... I will also build a 1/8 electric buggy within the next week or two... so I want to make sure I take my time to do it right.
Also... the ball diff is pre-built. Should I take it apart and make sure it is greased?
#1532
Yes there are plenty of composite shims left at the end of the build.
As for the diff, its always a safe bet to rebuild it, I did mine and there was zero black grease in the thrust bearing,
It's a 15 minute job rebuilding it and will give you plenty of peace of mind knowing it's right, so I'd reccomend that.
HTH
Luke
As for the diff, its always a safe bet to rebuild it, I did mine and there was zero black grease in the thrust bearing,
It's a 15 minute job rebuilding it and will give you plenty of peace of mind knowing it's right, so I'd reccomend that.
HTH
Luke
#1533
+1
#1534
steering belcranks?
hey guys,
can someone please tell me how long, center of bearing hole to center of screw hole, the new t3'11 belcranks are (approx. in MM)? i know its an odd question, but its for a project and i have ZERO access to a TC right now.
thanks ahead of time for any help
can someone please tell me how long, center of bearing hole to center of screw hole, the new t3'11 belcranks are (approx. in MM)? i know its an odd question, but its for a project and i have ZERO access to a TC right now.
thanks ahead of time for any help
#1536
Whoops, bellcrank, not steering knuckle, nm.
#1537
The new camberlink mounts have landed in the UK heres a quick scan of the info sheet included in the pack....
#1538
#1539
#1540
#1542
#1543
OMG 70 GBP in UK for all 4
http://www.rcdisco.com/part-info.php?partNo=XR302028-O
70GBP ECS shafts
60GBP Alloy shocks
Car 349GBP
Total 549GBP (891USD)
They don't call us rip off Britain for nothing haha
http://www.rcdisco.com/part-info.php?partNo=XR302028-O
70GBP ECS shafts
60GBP Alloy shocks
Car 349GBP
Total 549GBP (891USD)
They don't call us rip off Britain for nothing haha
#1544
Unfortunately I can't give you a date on parts in the US, would be best to contact RC America now you have the part number (302028-O)
The part number was on the last parts list RCDisCO (UK Distributor) received from Xray a few weeks back. They came in with our latest order which arrived yesterday.
In the UK they retail at £34.99 a pair so they arent cheap... However they are quite an intricate part and offer a huge ammount of adjustment compared to the H/L links so well worth it in my opinion
The part number was on the last parts list RCDisCO (UK Distributor) received from Xray a few weeks back. They came in with our latest order which arrived yesterday.
In the UK they retail at £34.99 a pair so they arent cheap... However they are quite an intricate part and offer a huge ammount of adjustment compared to the H/L links so well worth it in my opinion
#1545
Not knocking the car mind its great, and I'm sure will be even better with these parts
Just not entirely sure charging 130 quid for what is standard everywhere else actually is good value