Tires for a DRY clay track?
#1
Tires for a DRY clay track?
It's colder than usual where I live right now, and that means every heated building has super-dry air -- including the warehouse where my local indoor clay track is located. It's watered daily just before closing, but by the next afternoon it's dusty again. The Pro-Line Positron MC's I'm running right now are struggling to provide enough traction to accelerate enough to clear an after-corner triple-jump that has no runup. What kind of tread pattern should I try running instead?
#3
Tech Elite
iTrader: (39)
Well I'm not sure if it'll work the same for you two but Positrons were the prime Summer tire for our indoor clay track but everyone switches over to slicks for the winter like Proline Primes and Inversions. I switched to those and got a lot of traction back when taking off the positrons.
#5
Tech Elite
iTrader: (39)
I can't say I'm an expert but that is what I switched to and it was a huge difference with the way the track is currently. I've seen it before on our old outdoor track too. It was really dusty so I was using tires I thought would penetrate the dust but the fast guys were telling me to try slicks and sure enough slicks were a big difference back then too. I now just go with the track recommended tires rather than experiment with my own money and time lol
#6
It depends on where you are at, how much moisture is in the track.
#7
Tech Master
iTrader: (49)
It's colder than usual where I live right now, and that means every heated building has super-dry air -- including the warehouse where my local indoor clay track is located. It's watered daily just before closing, but by the next afternoon it's dusty again. The Pro-Line Positron MC's I'm running right now are struggling to provide enough traction to accelerate enough to clear an after-corner triple-jump that has no runup. What kind of tread pattern should I try running instead?
#8
Yep, I'm talking about Mimi's. Are Electrons really that different in terms of performance vs. Positrons, or is it the M4 compound vs. MC compound that makes the difference?
Primes still seem counterintuitive to me, but with multiple people recommending them for a dry track, I guess they work well for reasons I don't understand.
Primes still seem counterintuitive to me, but with multiple people recommending them for a dry track, I guess they work well for reasons I don't understand.
#10
Tech Master
iTrader: (49)
Yep, I'm talking about Mimi's. Are Electrons really that different in terms of performance vs. Positrons, or is it the M4 compound vs. MC compound that makes the difference?
Primes still seem counterintuitive to me, but with multiple people recommending them for a dry track, I guess they work well for reasons I don't understand.
Primes still seem counterintuitive to me, but with multiple people recommending them for a dry track, I guess they work well for reasons I don't understand.
#11
Tech Fanatic
iTrader: (5)
Might sound ridiculous but for 1/8 when my indoor track gets dry I swap out my SS Chainlinks for Catapults. They work quite well when the track is dry. But if it is damp or even borderline we, they are garbage (they pack up). But when it's dry that is the set-up I go to for 1/8. 1/10 positrons and electrons are the good tire when it's normal/damp, but not sure what the best set up is on those cars, as I have no first-hand experience. I will find out soon, as my car is almost finished.
#13
Might sound ridiculous but for 1/8 when my indoor track gets dry I swap out my SS Chainlinks for Catapults. They work quite well when the track is dry. But if it is damp or even borderline we, they are garbage (they pack up). But when it's dry that is the set-up I go to for 1/8. 1/10 positrons and electrons are the good tire when it's normal/damp, but not sure what the best set up is on those cars, as I have no first-hand experience. I will find out soon, as my car is almost finished.
#14
If there is dust on top, it might be worth changing tread pattern. Something like the AKA Typo or J-Concepts Pressure Points could work better with some dust. Also agree that if it dries out a conventional soft compound might work better than a clay compound, which I've always found to be best with moisture.
#15
My local track drys out in the summer. We blow it off with a leaf blower, and mist it with a backpack style weed sprayer. It takes very little time to prep, and you can drive on it almost immediately. It gets very sticky once we get a little moisture in the top of the dirt.
See if they have a leaf blower or brooms to get the dust off the track. When it is dusty, the wheel spin will wear tires quickly.
See if they have a leaf blower or brooms to get the dust off the track. When it is dusty, the wheel spin will wear tires quickly.