Hot Bodies Cyclone TC and Exotek Chassis Set Up for VTA

Reply Subscribe

Thread Tools

Search this Thread

11-09-2010, 10:11 AM

Doog

Tech Regular

Thread Starter

iTrader: (33)

Join Date: Oct 2005

Location: Oshkosh, Wisconsin

Posts: 343

Trader Rating: 33 (100%+)

Hot Bodies Cyclone TC and Exotek Chassis Set Up for VTA

This Hot Bodies Cyclone TC is used but in very good condition. It is ready to run except it does not include a radio receiver. It does include several hop-ups including an Exotek chassis made for easy mounting of LiPo batteries. The car is set up for VTA (Vintage Trans Am) racing now with the current legal Novak 25.5 motor and a legal Havok ESC. It was a consistent winner for me at my local track (Ozite carpet). It could easily be changed to touring car with a change of tires, body, and motor. Please see the attached pictures.

Includes for $450 (shipping included):

Hot Bodies Cyclone TC
Exotek HBX Chassis with LiPo Holders
Hot Bodies DCC universal drive shafts in front
HPI Vintage Tires
Novak Balistic VTA Legal 25.5 Brushless Motor
Novak Havok VTA Legal ESC
HPI Camaro VTA Legal Body
KO 2413 Low Profile Digital Steering Servo (Subtract $50 if you do not want this)
Fantom 2 cell, 5000mAh LiPo 40C Battery. I think these are made for Fantom by Thunder Power. (Subtract $50 if you do not want this)
1.5° (mounted in front), 2.5° (mounted in rear), and 3° Suspension Blocks
100T and 93T 64 Pitch Spur Gears (not pictured) along with 77T/36T 48 Pitch Spur/Pinion installed on car. The combo on the car is not optimum for VTA, but our local track put a ratio limit in place to keep the cars even with a local flavor of Vintage that ran at the same time.
NIP ball cups and front one-way/spool outdrive cups. One new front suspension arm (not in package).
Stock chassis with plastic battery slot spacers
Spare universal drive shafts (used). 1 set steel, 1 aluminum
2 new lay-shaft bearings and 2 new out-drive bearings
Manuals

PayPal with confirmed address and Lower 48 USA only. Please PM me if interested.