Team Associated RC10 B5m Mid-Motor & Rear Motor Thread
|
|||
Tech Addict
iTrader: (6)
Yea i don't blame you don't exactly care for them ethier prefer gear diffs but if you break them in good, and keep it from barking they actually last long and smooth . No need for the carbibe balls the MIP rebuild kit is cheap and good .
But 3k or 2k should work on loose dirt i think .
Tech Champion
iTrader: (14)
Ball diffs are the easiest to build and if properly built and broken-in, will last a long time and give much better results than a gear diff.
Ball-diff: low to high traction
Gear diff: uber high traction
Ball-diff: low to high traction
Gear diff: uber high traction
Is there a part number that can be ordered to use to mount the wing on the JC wing mount? Apparently you have to provide your own hardware?
Tech Champion
iTrader: (170)
Tech Fanatic
Please help. I'm considering buying a B5M. my last buggy was a b4.2 and loved it, but been out of the hobby for a little while.
I'm thinking either the lite, or the Cham. edition.
I will be racing on turf. (Stock)
Also considering waiting until the laydown tranny comes out.
Any advise or suggestions would be great.
I'm thinking either the lite, or the Cham. edition.
I will be racing on turf. (Stock)
Also considering waiting until the laydown tranny comes out.
Any advise or suggestions would be great.
Tech Rookie
OK I might be wrong but here is my thought. I tried something at my local track. It was a new layout and buggy was just a little rear end happy in the corners. Now I know many will say, " track hasn't come in yet". But I know other cars were not doing the same as mine so tried a change. Instead of running my camber links on the rear ( in on rear tower and middle on hub) I went to (in on rear tower and in on rear hubs. I was hoping for a little more camber gain in the corners.
R/C Tech Elite Member
iTrader: (112)
OK I might be wrong but here is my thought. I tried something at my local track. It was a new layout and buggy was just a little rear end happy in the corners. Now I know many will say, " track hasn't come in yet". But I know other cars were not doing the same as mine so tried a change. Instead of running my camber links on the rear ( in on rear tower and middle on hub) I went to (in on rear tower and in on rear hubs. I was hoping for a little more camber gain in the corners.
Tech Rookie
Anyone have a FL they want to sell?
Tech Rookie
If you are on a high bite track lengthen them it will make the car less twichey. On a loose track shorten them you will get more camber gain. On a high bite track you don't need as much camber gain.
Tech Regular
iTrader: (7)
Tech Rookie
Yeah I have too. Seems like I always miss Them.. And sucks even more since I lost the PW to my old user name it wont let me post the stuff I'm trying to sell.
Tech Rookie
Oh and was going to ask. Since I'm pretty sure I'm going to get a FL. Are there any recommendations or "Must Haves"?
Thanks
Thanks
Tech Regular
iTrader: (7)
There might be some nice things to have but nothing necessary. Like ceramic bearings, cut gears, etc...