D8T - What Are The Best/Required Upgrades For Racing?
#76
Hey,
Can any of you guys help me out with shock spring colors or a color chart with spring rates for the d8t ?? i own (3) of them and would not race anything else. we have big jumps out here and i bottom out (chassis slapp) hard all the time and dont want to do anymore dammage, i had my axial .28 rr-2 motor mount crack due to the stress of landing so hard, i have the stosk colors front and back but want to go stiffer without over doing it......... any advice from you "big-air" jumppers would be greatly appreciated.
Can any of you guys help me out with shock spring colors or a color chart with spring rates for the d8t ?? i own (3) of them and would not race anything else. we have big jumps out here and i bottom out (chassis slapp) hard all the time and dont want to do anymore dammage, i had my axial .28 rr-2 motor mount crack due to the stress of landing so hard, i have the stosk colors front and back but want to go stiffer without over doing it......... any advice from you "big-air" jumppers would be greatly appreciated.
http://www.amainhobbies.com/advanced...prings&x=0&y=0
#77
Not to change the subject but, I thought i'd share something important.
The front "castor-blocks" on our d8ts' are plastic and the threaded portion is vonerable to stripping out from the stress of the front hubs, I figured out that the aluminun upgraded "castor-bolcks" from the "HPI HELLFIRE" are identicle and only cost about $23.00 ( Integy brand on EBAY) compared to buying the ones supposedly only for d8ts' which are about $55.00 + . a great way to "bullet proof" your front end.
The front "castor-blocks" on our d8ts' are plastic and the threaded portion is vonerable to stripping out from the stress of the front hubs, I figured out that the aluminun upgraded "castor-bolcks" from the "HPI HELLFIRE" are identicle and only cost about $23.00 ( Integy brand on EBAY) compared to buying the ones supposedly only for d8ts' which are about $55.00 + . a great way to "bullet proof" your front end.
#78
Not to change the subject but, I thought i'd share something important.
The front "castor-blocks" on our d8ts' are plastic and the threaded portion is vonerable to stripping out from the stress of the front hubs, I figured out that the aluminun upgraded "castor-bolcks" from the "HPI HELLFIRE" are identicle and only cost about $23.00 ( Integy brand on EBAY) compared to buying the ones supposedly only for d8ts' which are about $55.00 + . a great way to "bullet proof" your front end.
The front "castor-blocks" on our d8ts' are plastic and the threaded portion is vonerable to stripping out from the stress of the front hubs, I figured out that the aluminun upgraded "castor-bolcks" from the "HPI HELLFIRE" are identicle and only cost about $23.00 ( Integy brand on EBAY) compared to buying the ones supposedly only for d8ts' which are about $55.00 + . a great way to "bullet proof" your front end.
http://www.rc-mushroom.com/advanced_...52&keywords=d8
#79
HELLO ?
IT doesnt matter who made it, WHAT DOES MATTER is that its made for an HPI product, which a division of HOTBODIES. Its a part that can and will fail and costs half the price, to pay twice THE PRICE would not make ANY sense.
IT doesnt matter who made it, WHAT DOES MATTER is that its made for an HPI product, which a division of HOTBODIES. Its a part that can and will fail and costs half the price, to pay twice THE PRICE would not make ANY sense.
#80
Could you please supply a link to one of the HPI parts on Ebay, I'd like to take a closer look at it? Thanks!
#81
i speak from experience with integy products...
#82
#83
HERE YA GO BUDDY,
REARS:
http://cgi.ebay.com/HPI-Hellfire-Sil...item20b3785908
FRONTS:
http://cgi.ebay.com/HPI-Hellfire-Sil...item2309e688ae
I have bid on these before and have won them for as little as $12.00 A SET.
FINALLY,
I would like to give a big "thank you" to one of our fellow members who instead of publically blasting me on what appeared to be an error on my part as to my thread, he politely sent me a private message stating his oppinion, i strongly dissagree, having (3) d8ts' myself. I APPLAUD HIM FOR HIS MATURITY.
THANKS, PEAKMAN
REARS:
http://cgi.ebay.com/HPI-Hellfire-Sil...item20b3785908
FRONTS:
http://cgi.ebay.com/HPI-Hellfire-Sil...item2309e688ae
I have bid on these before and have won them for as little as $12.00 A SET.
FINALLY,
I would like to give a big "thank you" to one of our fellow members who instead of publically blasting me on what appeared to be an error on my part as to my thread, he politely sent me a private message stating his oppinion, i strongly dissagree, having (3) d8ts' myself. I APPLAUD HIM FOR HIS MATURITY.
THANKS, PEAKMAN
Last edited by guntek18; 09-09-2010 at 08:48 AM.
#84
HERE YA GO BUDDY,
REARS:
http://cgi.ebay.com/HPI-Hellfire-Sil...item20b3785908
FRONTS:
http://cgi.ebay.com/HPI-Hellfire-Sil...item2309e688ae
I would like to give a big "thank you" to one of our fellow members who instead of publically blasting me on what appeared to be an error on my part as to my thread, he politely sent me a private message stating his oppinion, i strongly dissagree, having (3) d8ts' myself. I APPLAUD HIM FOR HI MATURITY.
REARS:
http://cgi.ebay.com/HPI-Hellfire-Sil...item20b3785908
FRONTS:
http://cgi.ebay.com/HPI-Hellfire-Sil...item2309e688ae
I would like to give a big "thank you" to one of our fellow members who instead of publically blasting me on what appeared to be an error on my part as to my thread, he politely sent me a private message stating his oppinion, i strongly dissagree, having (3) d8ts' myself. I APPLAUD HIM FOR HI MATURITY.
#85
THE SAME AS YOU WOULD GET FROM INTEGY,
I'M NEW TO THIS FORUM, NOT TO THIS HOBBY.
WHEN MINE FAIL, I'LL BE THE ONE TO BLAST THEM PUBLICALLY, NOT TILL THEN.
I'M NEW TO THIS FORUM, NOT TO THIS HOBBY.
WHEN MINE FAIL, I'LL BE THE ONE TO BLAST THEM PUBLICALLY, NOT TILL THEN.
#86
but its not the same.. and by the way.. we all have used integy before .. so there is a reason for us stating this.. and on another note.. having your caps lock on suggest that your yelling... or upset...
#87
I like using caps and i never , ever, EVER , YELL!!
Someone must have gotten passed over for captain of the debate team.
ANYWAY:
PART# T8402
EVEN IF ITS ALLOY, ITS STRONGER THAN PLASTIC AND HOLDING UP, JUST FINE.
http://www.integy.com/st_prod.html?p...97&p_catid=102
Someone must have gotten passed over for captain of the debate team.
ANYWAY:
PART# T8402
EVEN IF ITS ALLOY, ITS STRONGER THAN PLASTIC AND HOLDING UP, JUST FINE.
http://www.integy.com/st_prod.html?p...97&p_catid=102
#88
just a little forum etiquette.. you might want to learn.... good luck with your integy....
and i was captain for my team from freshman all the way up to graduate school...
funny you should mention that
and i was captain for my team from freshman all the way up to graduate school...
funny you should mention that
#89
The d8t is an excellent truck right out of the gate, I run my truck completly stock and the durability is great and so is performance..
#90