eXpress Motorsports
#4683
Jon,
yea it was leaked on this thread!!!
please PM me your resume and myself, cuffs and ming will look it over along with the others . . .
TEAM MING . . . .Express Powered . . .Get on the Ming Track . . .
later,
Chris08527
Team Ming Member #003
yea it was leaked on this thread!!!
please PM me your resume and myself, cuffs and ming will look it over along with the others . . .
TEAM MING . . . .Express Powered . . .Get on the Ming Track . . .
later,
Chris08527
Team Ming Member #003
#4684
Originally Posted by Chris08527
. . .Get on the Ming Track . . .
#4685
Tag, YGPM
#4686
Hmmm...there may be a conflict of interest in me running for Team Mings and Team Pickles. I'm not sure what to do...
I'm going to have to divide my time between the teams. I'll run for Team Mings at larger events. I'm thinking I better prep my ride differently now for Vegas. Ming, what kind of droop should I run for Vegas?
I'm going to have to divide my time between the teams. I'll run for Team Mings at larger events. I'm thinking I better prep my ride differently now for Vegas. Ming, what kind of droop should I run for Vegas?
#4690
Tech Addict
iTrader: (1)
Join Date: Jan 2004
Location: princeton, NJ and wall street, NYC
Posts: 514
Trader Rating: 1 (100%+)
Jon,
With Team Ming, I can assure you one thing...
you will not keep or stay in the middle, you will carve
and slice a beautiful line on the apex
by not stay in the middle of the lane.
I, myself, is still trying to perfect this technique,
so far, I have success with 2 broken A-arms
on a conference meeting with the side wall in jackson's track.
for the droop setting, my yoko LCG is running 4mm at the front,
4mm at the rear with 1 degree of kick up at the front toe block,
so far. it runs like a champ, accelerates like a champ,
and kisssss a wall like a champ also. all with stock motor and RP-30 tires.
I have never run foam tires in the US....
beside racing those 1/32 tamiya mini car in asia...
yes.. we ran foams on those... and i was crazy about them.
so.. tomorrow is going to be my first time out at the horsham,
with my noodle flexy yoko LCG.
~ming
Team Ming member #000
With Team Ming, I can assure you one thing...
you will not keep or stay in the middle, you will carve
and slice a beautiful line on the apex
by not stay in the middle of the lane.
I, myself, is still trying to perfect this technique,
so far, I have success with 2 broken A-arms
on a conference meeting with the side wall in jackson's track.
for the droop setting, my yoko LCG is running 4mm at the front,
4mm at the rear with 1 degree of kick up at the front toe block,
so far. it runs like a champ, accelerates like a champ,
and kisssss a wall like a champ also. all with stock motor and RP-30 tires.
I have never run foam tires in the US....
beside racing those 1/32 tamiya mini car in asia...
yes.. we ran foams on those... and i was crazy about them.
so.. tomorrow is going to be my first time out at the horsham,
with my noodle flexy yoko LCG.
~ming
Team Ming member #000
Last edited by aoizip; 09-07-2005 at 09:10 AM.
#4691
Originally Posted by John Fontaine
Jon - Can you give the folks here some info about the mod motors that Express is offering?
#4692
Tech Champion
iTrader: (42)
Hey Guys, I'm getting some mods together for the team to try then I will relaese all the details. Till these get done and tested they will be in limited supply. They will be wound by a un-named well known winder from the west coast. I will have some ready within the next week for those looking to try some... Just PM me or shoot me a e mail...THX