6LikesTeam Durango DEST210R thread
09-11-2012, 09:34 PM
#301
Ok so I installed a gear diff and the tc5 ballstuds with jconcept/losi ballcups, gonna go to the track tomorrow and see if I can get more then 3 laps out of this thing. If my changes don't improve then its time for me to move on, I also think I know why my ball diff wasn't working correctly, I looked at all the pics and online videos of the build on one and the e-clip I was sent looks completely different so I will see if my local hobby shop has any and retry the ball diff again if I keep the rango.........
09-12-2012, 12:51 AM
#303
New Carbon Fibre Parts From Diggity Designs
Just released - 4mm front and rear carbon fibre shock towers for the DEST210R and DESC210R kits. The DEX210 battery strap and steering rack is also compatible with these kits, below are a couple pics of the parts available -
http://www.diggitydesigns.com/D3_OffRoad_Products.html
http://www.diggitydesigns.com/D3_OffRoad_Products.html
09-12-2012, 10:15 AM
#304
Sorry to post on all the Durango threads.. but I thought Durango lovers should be aware of this...
Someone told me.. we'll be giving away something from.... TEAM DURANGO this week on RCSoup.com!
http://www.rcsoup.com/2012/08/rc-sou...ar-every-week/
Someone told me.. we'll be giving away something from.... TEAM DURANGO this week on RCSoup.com!
http://www.rcsoup.com/2012/08/rc-sou...ar-every-week/
09-12-2012, 10:24 AM
#305
Just released - 4mm front and rear carbon fibre shock towers for the DEST210R and DESC210R kits. The DEX210 battery strap and steering rack is also compatible with these kits, below are a couple pics of the parts available -
http://www.diggitydesigns.com/D3_OffRoad_Products.html
http://www.diggitydesigns.com/D3_OffRoad_Products.html
Love your stuff! run it all on my dex210 and just ordered this for my dest210
Keep up the good work....
Campbell
09-12-2012, 01:26 PM
#306
Just tried out my mid motor setup for the first time on an indoor clay track. For the first outing, it worked really well. Track was a bit wet, so traction is still a bit of a mystery, but in the sections that were dry it felt like it wasn't going to be a problem. Ofcourse the turning was far superior to RM, but I expected that. All in all, it was a very positive testing.
09-13-2012, 12:15 AM
#307
Just started to build my desc210r and when building diff i noticed that the circlip is not rounded anymore both sides are the same. and other funny staff
09-13-2012, 12:44 AM
#308
I had the same issue when building my ball diff, I was wondering why I kept having issues of it not working properly and when I looked at all the video's and pics online I noticed the same thing with the eclip I was sent. So I would def. contact Team Durango and get the correct one or the diff will just keep giving out..........
09-13-2012, 06:18 AM
#309
09-13-2012, 09:02 AM
#310
09-13-2012, 09:08 AM
#311
09-13-2012, 08:14 PM
#312
Chassis
Well i am pretty disappointed to report my chassis broke after about 6 packs. It broke right around the front bulkhead screws. Cracks started after about 4 packs and then it totally let go a couple packs later. I don't know if I got a bad chassis or if there is an issue. We'll have to see if anyone else has the same issue.
09-13-2012, 09:57 PM
#313
Well i am pretty disappointed to report my chassis broke after about 6 packs. It broke right around the front bulkhead screws. Cracks started after about 4 packs and then it totally let go a couple packs later. I don't know if I got a bad chassis or if there is an issue. We'll have to see if anyone else has the same issue.
I really cant see how unless it was stress cracked as you say
09-14-2012, 08:16 AM
#314
The jumps aren't big. It is OCRC so it is in indoor clay track with a relatively tame track. I wish I could say, yeah I pinned it into the end of the straightaway, because then I wouldn't be so disappointed, but that just wasn't the case. It hasn't been crashed any harder than 90% of the other cars on our track, so unfortuately either I got a bad chassis, or there are going to be more of the same.
09-14-2012, 02:04 PM
#315
The jumps aren't big. It is OCRC so it is in indoor clay track with a relatively tame track. I wish I could say, yeah I pinned it into the end of the straightaway, because then I wouldn't be so disappointed, but that just wasn't the case. It hasn't been crashed any harder than 90% of the other cars on our track, so unfortuately either I got a bad chassis, or there are going to be more of the same.
thats a bummer maybe shoot them a email with pictures etc you never know your luck