Awesomatix EP Touring Car (A700 Shaft Drive)
#4066
Agree very much. 6xST09 is the best I have found. Tried lots of variations (I've got 7 or so topdecks all cut differently) and found a cut deck mounted solid was not as good as a floating uncut deck. It provides lots of initial flex which gives great turn in, especially in slow, tight corners, but locks out after flexing a certain amount and then acts like a stiff car in the fast sweepers, which provides cornerspeed. (Well that's my story, and I'm sticking to it!)
#4067
Tech Fanatic
AOC Round 3 RC City Bangkok, Thailand
Several pictures of our drivers and cars are here:
https://www.facebook.com/media/set/?...1331718&type=1
Several pictures of our drivers and cars are here:
https://www.facebook.com/media/set/?...1331718&type=1
#4068
Another little weak spot cured with cone flywheel
A do it yourself excercise, rear downforce on wheelhubs
HB Subaru C, best compromise for me
A do it yourself excercise, rear downforce on wheelhubs
HB Subaru C, best compromise for me
Last edited by ropezz; 08-16-2013 at 04:25 PM.
#4069
I can't understand how it can work... Does this system replace the original supports? If they are additional support, how is possible that the body is not preventing the rear train to work properly? I mean, when you accelerate the chassis is going closer to the ground and your additional supports are pushing up the body... How to you fix the body in the rear?
#4070
Tech Lord
iTrader: (86)
I can't understand how it can work... Does this system replace the original supports? If they are additional support, how is possible that the body is not preventing the rear train to work properly? I mean, when you accelerate the chassis is going closer to the ground and your additional supports are pushing up the body... How to you fix the body in the rear?
I think his guy is using the copy cat of the 1/8 scale gas car body mounts
#4071
Tech Master
iTrader: (3)
Looks like he's increased his unsprung weight by having the body supported by the hubs, but downforce won't increase anyways. With air pressure pushing down on the body when its attached to the chassis in the rear in the normal way, the suspension and tires still have to push down on the track with the same force to hold the body up. No increase in downforce. Increase in unsprung weight. Not good.
#4072
Noodle
Car has to be like a wet noodle with no top deck and just a rod
#4074
Setups
Nothing major a few mm here and there . Both cars are torn apart and starting with at21s so should have some if I ever get a chance to go to the track. My job is short handed so we have mandatory 16 hour days and no end in sight.
#4075
Tech Initiate
#4077
Tech Initiate
#4078
Tech Initiate
Does anyone know what AM38 Trial Central Brace is ?