KO Propo VFS-2000 ESC
#61
Tech Master
Re: KO Propo staff
Originally posted by milf
Hi! Just want to say thanks, a buddy of mine went to the TCS race a couple of weeks ago, and he gave you a few items to fix. Thanks for getting it done so quickly, I was really happy that you guys got it back to us so soon. Thanks again.
Hi! Just want to say thanks, a buddy of mine went to the TCS race a couple of weeks ago, and he gave you a few items to fix. Thanks for getting it done so quickly, I was really happy that you guys got it back to us so soon. Thanks again.
No problem. We try to get the fastest turn around time on all repaired items. Enjoy.
#62
Tech Master
Re: KO Propo staff
Originally posted by milf
I would like the settings that you have can you email it to me.
[email protected]
Thanks KO Staff. I love this ESC, I have 3 of them
I would like the settings that you have can you email it to me.
[email protected]
Thanks KO Staff. I love this ESC, I have 3 of them
you can goto our site and download settings for different applications. Look under the products/ESC/VFS. There is a link to the settings. Thanks.
#63
hara's setting
hara's setting can be downloaded here :
http://www.kopropo.co.jp/html/vfs_support3.html
open the file using the vfs pc software that can be downloaded here:
http://www.kopropo.co.jp/software/VFS1018.EXE
u still need to buy the cable that connects the PC to the VFS though..
its hara's 1/12 4 cell modified settings and his touring 23T setting.
http://www.kopropo.co.jp/html/vfs_support3.html
open the file using the vfs pc software that can be downloaded here:
http://www.kopropo.co.jp/software/VFS1018.EXE
u still need to buy the cable that connects the PC to the VFS though..
its hara's 1/12 4 cell modified settings and his touring 23T setting.
#64
Tech Rookie
rookie80
Thank you
#65
Tech Rookie
KO Staff
Hello.I run 11T motor.Should be set drive frequency?Thank you.
#66
Re: hara's setting
Originally posted by rookie80
hara's setting can be downloaded here :
http://www.kopropo.co.jp/html/vfs_support3.html
open the file using the vfs pc software that can be downloaded here:
http://www.kopropo.co.jp/software/VFS1018.EXE
u still need to buy the cable that connects the PC to the VFS though..
its hara's 1/12 4 cell modified settings and his touring 23T setting.
hara's setting can be downloaded here :
http://www.kopropo.co.jp/html/vfs_support3.html
open the file using the vfs pc software that can be downloaded here:
http://www.kopropo.co.jp/software/VFS1018.EXE
u still need to buy the cable that connects the PC to the VFS though..
its hara's 1/12 4 cell modified settings and his touring 23T setting.
#67
Originally posted by hobbipro
BTW: yes all the motor leads and connectors come pre-installed. The only thing needed to add is the shotki, and power condenser (both come with it) if you run mod motors or use NiMH.
BTW: yes all the motor leads and connectors come pre-installed. The only thing needed to add is the shotki, and power condenser (both come with it) if you run mod motors or use NiMH.
#68
Tech Regular
Re: Re: KO Propo staff
Originally posted by KO PROPO Staff
milf,
you can goto our site and download settings for different applications. Look under the products/ESC/VFS. There is a link to the settings. Thanks.
milf,
you can goto our site and download settings for different applications. Look under the products/ESC/VFS. There is a link to the settings. Thanks.
#69
Tech Rookie
bruisedwillis:
It's only a 3 pin serial connection so this would imply that you only need ground, Rx and Tx. The pinout on the db9 connector is:
pin 2 - Rx
pin 3 - Tx
pin 5 - Gnd
I'd imagine the black wire is ground with Tx and Rx being on the 2 remaining wires. It doesn't usually matter if you get Tx/Rx around the wrong way but it won't work properly. If this happens just reverse the Tx/Rx and it should work okay.
Of course you do this at your own risk, but if someone could give the exact pinout it'd be much less risky
It's only a 3 pin serial connection so this would imply that you only need ground, Rx and Tx. The pinout on the db9 connector is:
pin 2 - Rx
pin 3 - Tx
pin 5 - Gnd
I'd imagine the black wire is ground with Tx and Rx being on the 2 remaining wires. It doesn't usually matter if you get Tx/Rx around the wrong way but it won't work properly. If this happens just reverse the Tx/Rx and it should work okay.
Of course you do this at your own risk, but if someone could give the exact pinout it'd be much less risky
#70
Anywhere the program software can be downloaded?
#71
KO PROPO staff.
I saw that KO have to different sizes of caps.
Are there any other differences?
Why do these have a 35V rating. Isn't 10V enough becouse this only makes them bigger I think.
I saw that KO have to different sizes of caps.
Are there any other differences?
Why do these have a 35V rating. Isn't 10V enough becouse this only makes them bigger I think.
#74
Does anyone have the twister (hara's ESC) out of the box setting?
thanks in advance..
thanks in advance..
#75
Hobbymania is currently out of the KO and the Tamiya. Andy says that the Tamiya is limited availibility.