Dark Soul 1.9 MRC
#1
Dark Soul 1.9 MRC
--------------------------------------------------------------------------------
Dark Soul Chassis with Titanium Links
Dark Soul Inboard Shock Mount
Dark Soul 1.9 wheels with weights,Pretty sure they are scratchless
Crawler Inovations Cobra's with Eddie's Memory foam
Losi Grappler Body painted by CrawlerGraphics
Losi Grappler Body NIP..
Losi Metal Tranny Locker
Losi Metal Diff Lockers front and rear
Losi Aluminum Front C's
Losi Aluminum Front Knuckles
Losi Front CVD's
2x Losi 7.4V 600mAh 20C Lipo
Losi NIP 30 bent links
Hot Racing Shocks
Hot Racing Aluminum wheel Hex's
Holmes Hobbies Torque Master Mini Motor
Futaba S9551 Full Size Low Profile steering servo
Tekin B1R ESC Needs a new capacitor but still works
One of the lipo's is almost new charged one time. Bought this off a member on here and it's in great shape. I've ran it about 5 times and it simply works. Wheels in bottum pics are not avaliable
Im intrested in a basher prefer a E maxx, Trades must = 350.00 bones. No junk Plz. Picture of trades are a must,,,Thanks
Dark Soul Chassis with Titanium Links
Dark Soul Inboard Shock Mount
Dark Soul 1.9 wheels with weights,Pretty sure they are scratchless
Crawler Inovations Cobra's with Eddie's Memory foam
Losi Grappler Body painted by CrawlerGraphics
Losi Grappler Body NIP..
Losi Metal Tranny Locker
Losi Metal Diff Lockers front and rear
Losi Aluminum Front C's
Losi Aluminum Front Knuckles
Losi Front CVD's
2x Losi 7.4V 600mAh 20C Lipo
Losi NIP 30 bent links
Hot Racing Shocks
Hot Racing Aluminum wheel Hex's
Holmes Hobbies Torque Master Mini Motor
Futaba S9551 Full Size Low Profile steering servo
Tekin B1R ESC Needs a new capacitor but still works
One of the lipo's is almost new charged one time. Bought this off a member on here and it's in great shape. I've ran it about 5 times and it simply works. Wheels in bottum pics are not avaliable
Im intrested in a basher prefer a E maxx, Trades must = 350.00 bones. No junk Plz. Picture of trades are a must,,,Thanks
Last edited by hardhead; 01-03-2011 at 03:13 AM.
#6