Mugen MRX-4
#1337
Kyosho Tool
The part number for the tool is:
KY-VZW040
Very nice tool to measure end-play.
KY-VZW040
Very nice tool to measure end-play.
#1338
Originally Posted by HarKonnenD
Thnx for the reply. When did you try them out and what track? Just wondering.
Bridgeport has a pretty smooth surface, its usually the little things that fall off the trees and grass that get your belts, those will get you no matter how tight your belt is.
If you find your self driving on a rough surface where you might need it, it's a different story then but you say you've had no problems.
#1342
New kid on the block...
Just wanted to post here that a new neighbor is on the stable (here...) is a MRX4-R just to make companion the other Mugens (MTX3/4 & MRX3... who said that 3 is a good number? ).
Along the new guy sports a Ninja R01 engine, just a pair of pics before being installed all the radio gear and linkages (mostly stock, blade rear bar, rubber belts and upper Ti screwset in on order). Tomorrow is the great day with the break-in the beast.
Photo 1
Photo 2
Edit: The engine, for a little less than 500Euros with complete exhaust is a thing to be seriously considered, specially if they hold well against JP's, Sirios and Plus3-21's...
Along the new guy sports a Ninja R01 engine, just a pair of pics before being installed all the radio gear and linkages (mostly stock, blade rear bar, rubber belts and upper Ti screwset in on order). Tomorrow is the great day with the break-in the beast.
Photo 1
Photo 2
Edit: The engine, for a little less than 500Euros with complete exhaust is a thing to be seriously considered, specially if they hold well against JP's, Sirios and Plus3-21's...
Last edited by Corse-R; 05-06-2006 at 04:35 AM.
#1343
Anyone where do i can find a rear bearing for my 35 plus 21?
#1344
Tech Master
iTrader: (17)
Originally Posted by Joe Os
Anyone where do i can find a rear bearing for my 35 plus 21?
Try www.brooklynhobbies.com, they should have what you need in stock.
If not www.fusionmotorsports.com, Jim is the U.S. Novarossi distributor.
#1346
Tech Regular
iTrader: (2)
Only way to go........
Nice job this weekend Mugen drivers. Glad to see Ron and Mike come up from Cali. Like to thank all the Mugen guys for this week. We shared good info to get the cars up to par. Ira did an awesome job pitting for Ron, nice clean pit stops. Ron did a great job being very consistent and clean with his car. Ira and I would also like to thank Joby for the hospitality.....hope to do it all again for the Nationals. Keep up the winning way MugenUSA.......till next race. Kurt
#1347
Originally Posted by Jamie Corrado
Joe Os,
Try www.brooklynhobbies.com, they should have what you need in stock.
If not www.fusionmotorsports.com, Jim is the U.S. Novarossi distributor.
Try www.brooklynhobbies.com, they should have what you need in stock.
If not www.fusionmotorsports.com, Jim is the U.S. Novarossi distributor.
#1350
Tech Regular
iTrader: (1)
Originally Posted by Kurly
Nice job this weekend Mugen drivers. Glad to see Ron and Mike come up from Cali. Like to thank all the Mugen guys for this week. We shared good info to get the cars up to par. Ira did an awesome job pitting for Ron, nice clean pit stops. Ron did a great job being very consistent and clean with his car. Ira and I would also like to thank Joby for the hospitality.....hope to do it all again for the Nationals. Keep up the winning way MugenUSA.......till next race. Kurt
I was a pleasure meeting you, Ira and all the midwest Mugen gang. You guys have a great series. Hope to see you again at the GLC!