Mugen MRX-4R
05-30-2006, 09:23 AM
#77
Tech Adept
MRX4R
Yes, the rear body mount for the MRX4R, it has two sets of mounting holes, inner holes for the short, outer for the long.
the part #HO466A , or.... #HO466 is the number for the mount and all the hardware to install it.
hope this helps.
the part #HO466A , or.... #HO466 is the number for the mount and all the hardware to install it.
hope this helps.
05-30-2006, 12:53 PM
#78
Originally Posted by AKSHUN
Yes, the rear body mount for the MRX4R, it has two sets of mounting holes, inner holes for the short, outer for the long.
the part #HO466A , or.... #HO466 is the number for the mount and all the hardware to install it.
hope this helps.
the part #HO466A , or.... #HO466 is the number for the mount and all the hardware to install it.
hope this helps.
06-01-2006, 09:14 AM
#80
Originally Posted by jjmudd
This may seem like a newbie question but I am new to the Mugen! How tight should the servo save be set? Or how far up the shaft should the spring collar be set? Thanks guys.
John
John
I screw my car's Servo Saver Collar about 0.5 mm from the flat part of the collar to the chassis. I don't necessarily measure it to be exact but the idea is to have the collar clear enough not to rub and ofcourse swivel as free as possible.
Hope this helps.
06-04-2006, 12:17 AM
#82
Originally Posted by AKSHUN
what about price, is it close to the 35plus price tag??
from what i have seen this year, the 35plus21 will be the motor to beat, there may be some that are a little faster, but nothing that runs as cool and has so much power, well, except for my C5,lol
from what i have seen this year, the 35plus21 will be the motor to beat, there may be some that are a little faster, but nothing that runs as cool and has so much power, well, except for my C5,lol
06-07-2006, 02:18 AM
#83
Hey guys i wanna know whats the deff. bet. stock chasis & the option one?
06-07-2006, 05:57 AM
#85
Originally Posted by Joe Os
What about ninja engine?
Texas Biggie a week ago. Both were very fast. In the A-Main
I was able to see the Stock Ninja Engine's perfomance over
the entire 1 hour main. There was every brand out there
running with me .. Hot Mod 21+3, Max MF, FX03 & a Murnan.
I can say that the Engine was definately fast and that there
was no other engine that showed any signs of checking out
on the Ninja, it could hang with all of them! No fuel issues
.... mileage wasn't a problem!
It / I finished 2nd in the A with it ...... very reliable!
If you can get a Ninja ..... GET ONE! Easy to tune as well.
We also did a test the week before the Biggie with a Hot Mod &
an FX03 ......... at times the Ninja felt faster .... the power
seems to be more linear .... smooth through the range, it
does not feel like NovaRossi based engine.
Take care!
Terry Brown
06-07-2006, 07:47 AM
#86
Tech Adept
Thanks Terry, im gonna look into it.
im also breaking in one of my new LC21GT's, this is the world champ motor used by collari in the worlds, it really screams, but im not to fond of the three needle carb(spray bar), does anyone recommend a decent carb for this motor??
steve
im also breaking in one of my new LC21GT's, this is the world champ motor used by collari in the worlds, it really screams, but im not to fond of the three needle carb(spray bar), does anyone recommend a decent carb for this motor??
steve
06-12-2006, 05:26 AM
#88
Tech Fanatic
iTrader: (23)
Originally Posted by quietstorm76
Can anyone tell me the ratings for the mugen pink rear spring and the red rear spring? Can't seem to find it.
06-13-2006, 04:09 AM
#89
Mrx4 for sale... good condition pm me for more info.
06-16-2006, 02:57 PM
#90
Originally Posted by quietstorm76
Can anyone tell me the ratings for the mugen pink rear spring and the red rear spring? Can't seem to find it.