BMI's DB12R
#5988
Tech Champion
iTrader: (261)
That sounds great.
Does that mean we need a new width of spacer for the Jaco rears? Guessing we use up some of (all?) the spacer width from the right side now, guessing the left side remains the same.
If it uses up all the spacer width we're golden--a package of 2 is now good for 2 cars. If it uses up only part wouldn't it be cool if we had a narrower spacer? I sure like the BMI spacers vs. monkeying around with shims!!
Scottrik
Does that mean we need a new width of spacer for the Jaco rears? Guessing we use up some of (all?) the spacer width from the right side now, guessing the left side remains the same.
If it uses up all the spacer width we're golden--a package of 2 is now good for 2 cars. If it uses up only part wouldn't it be cool if we had a narrower spacer? I sure like the BMI spacers vs. monkeying around with shims!!
Scottrik
#5990
hey Jason
will the upgrade kit come with a new Chassis Side Wing Brace, looking forward to the upgrade, my car was dialed with the set up you gave me. also do you carry the surelube kit.
will the upgrade kit come with a new Chassis Side Wing Brace, looking forward to the upgrade, my car was dialed with the set up you gave me. also do you carry the surelube kit.
#5992
if you can get it that would be great. maybe you'll have by the time you shipp my upgrade kit thanks
#5993
Jason,
You have PM.
You have PM.
#5994
Jason
I noticed that you sell the SPEED PASHION esc on your site. Are they better than the LRP or NOVAK brushless for use in the DB12R or DB10R? The resaon I ask is because SPEED PASHION is new to me and I do not know any thing about them. I am going to get a DB10R or DB12R in the next couple of weeks and would like to go brushless when I do, most of the guys I race with run LRP brushless or NOVAK brushless in there 1/12th scales, right now I run a KEYENCE RAPIDA brushed esc in my 1/12th (tired of the motor maint).
You and all of the guys on this thread are really helpful and that is is why I have decided to try the BMI cars. BIG THANKS TO ALL OF YOU
I noticed that you sell the SPEED PASHION esc on your site. Are they better than the LRP or NOVAK brushless for use in the DB12R or DB10R? The resaon I ask is because SPEED PASHION is new to me and I do not know any thing about them. I am going to get a DB10R or DB12R in the next couple of weeks and would like to go brushless when I do, most of the guys I race with run LRP brushless or NOVAK brushless in there 1/12th scales, right now I run a KEYENCE RAPIDA brushed esc in my 1/12th (tired of the motor maint).
You and all of the guys on this thread are really helpful and that is is why I have decided to try the BMI cars. BIG THANKS TO ALL OF YOU
Last edited by BIGBOT; 11-16-2008 at 07:04 PM.
#5996
hey Jason
i found the surelube kit at my LHS. so i'm good. no need to order.
i found the surelube kit at my LHS. so i'm good. no need to order.
#5998
Tech Lord
iTrader: (13)
Hey Guys,
I wanted to let you know that i have made the decision that our 1/12th car is now going to come standard with all of the new parts. I will still offer the update kit and pod seperately so the existing cars can be upgraded at a minimal cost. The car will also come standard with the new lowered pods. Even though our costs have increased, I will be holding the price the same. There will be no increase in price. The new car will be called the DB12RR. Thanks for your ongoing support. I couldnt have gone this far without you guys.
Thanks again,
Jason
I wanted to let you know that i have made the decision that our 1/12th car is now going to come standard with all of the new parts. I will still offer the update kit and pod seperately so the existing cars can be upgraded at a minimal cost. The car will also come standard with the new lowered pods. Even though our costs have increased, I will be holding the price the same. There will be no increase in price. The new car will be called the DB12RR. Thanks for your ongoing support. I couldnt have gone this far without you guys.
Thanks again,
Jason
#5999
Tech Elite
iTrader: (64)
Join Date: Jun 2008
Location: Conducting aggressive board meetings at my local track
Posts: 3,301
Trader Rating: 64 (100%+)
Hey Guys,
I wanted to let you know that i have made the decision that our 1/12th car is now going to come standard with all of the new parts. I will still offer the update kit and pod seperately so the existing cars can be upgraded at a minimal cost. The car will also come standard with the new lowered pods. Even though our costs have increased, I will be holding the price the same. There will be no increase in price. The new car will be called the DB12RR. Thanks for your ongoing support. I couldnt have gone this far without you guys.
Thanks again,
Jason
I wanted to let you know that i have made the decision that our 1/12th car is now going to come standard with all of the new parts. I will still offer the update kit and pod seperately so the existing cars can be upgraded at a minimal cost. The car will also come standard with the new lowered pods. Even though our costs have increased, I will be holding the price the same. There will be no increase in price. The new car will be called the DB12RR. Thanks for your ongoing support. I couldnt have gone this far without you guys.
Thanks again,
Jason