Kyosho FW-05R
#1696
Originally posted by ziggy12345
Are you running the same gearing as me?
Cheers
Are you running the same gearing as me?
Cheers
Hopefully I should have some comparison lap times after this Sunday.
#1697
Ok. Whats the part number for the 46t bevel gear? I only have the 45 and 46 as per the centre conversion
I have the 20t first gear
Cheers
I have the 20t first gear
Cheers
#1699
Originally posted by Marcos.S710
where can i order the kawahara conversion?
where can i order the kawahara conversion?
http://www.pro-s-futaba.co.jp/new.htm
#1700
Re: Re: Set-Up Board
Originally posted by NiMo
You don't need anything but your life will be so much easier if you have the set up equipment.
A sheet of glass can be used instead of a proper board.
The Hudy guages can become scratched and hard to read in poor light, I sold mine and got some alloy ones.
You may want to look at a 'Tweak Station' as well so you know your car actually sits flat on the road under its own weight.
I don't use my ride height guages as I tend to go by look and feel.
You don't need anything but your life will be so much easier if you have the set up equipment.
A sheet of glass can be used instead of a proper board.
The Hudy guages can become scratched and hard to read in poor light, I sold mine and got some alloy ones.
You may want to look at a 'Tweak Station' as well so you know your car actually sits flat on the road under its own weight.
I don't use my ride height guages as I tend to go by look and feel.
#1701
Re: Re: Re: Set-Up Board
Originally posted by Ares17
Hi Nimo, thanx for the reply. But can u tell me what consist of the set-up equipment? looks like i'm gonna need a complete set-up equipment. Any web site for reference? Cause I'm not quite sure how the set-up equipment look like. Thanx.
Hi Nimo, thanx for the reply. But can u tell me what consist of the set-up equipment? looks like i'm gonna need a complete set-up equipment. Any web site for reference? Cause I'm not quite sure how the set-up equipment look like. Thanx.
Set Up Kit
Shock Set Up
Tweak Station
#1702
Re: Re: Re: Re: Set-Up Board
will be setting out to look for those soon...
#1703
Is there anything commercially available to check shock springs? I need to measure the strength of some I have
Cheers
Cheers
#1704
Originally posted by ziggy12345
Is there anything commercially available to check shock springs? I need to measure the strength of some I have
Cheers
Is there anything commercially available to check shock springs? I need to measure the strength of some I have
Cheers
Not only does it do shock lengths but it can measure shock damping resistance in pairs, so you can possibly check spring resistance as well.
#1705
Hi Ziggy,
Integy sells this tool:
http://integy.automated-shops.com/cg...00104308326.9a
-Rich
Integy sells this tool:
http://integy.automated-shops.com/cg...00104308326.9a
-Rich
Originally posted by ziggy12345
Is there anything commercially available to check shock springs? I need to measure the strength of some I have
Cheers
Is there anything commercially available to check shock springs? I need to measure the strength of some I have
Cheers
#1706
Re: Pinion gears
Originally posted by RichChang
Hi,
Where are you purchasing the Mugen 28T and 29T pinions from? I cannot find anywhere local that sells them (nor on rcmart, rc-union, and rcsquare).
Also, will the Mugen gears fit on the Kyosho centax end-bell?
Thanks,
-Rich
Hi,
Where are you purchasing the Mugen 28T and 29T pinions from? I cannot find anywhere local that sells them (nor on rcmart, rc-union, and rcsquare).
Also, will the Mugen gears fit on the Kyosho centax end-bell?
Thanks,
-Rich
#1707
Yep, Will sent me an email that he had them. He also has the Mugen end-bell. I am now waiting for them to arrive at my front door.
-Rich
-Rich
#1708
Where can i get spares for the Kawahara conversion kit? Anybody know the indevidual part numbers for the bits that make up the conversion kits?
Thanks
Thanks
#1709
Originally posted by ziggy12345
Where can i get spares for the Kawahara conversion kit? Anybody know the indevidual part numbers for the bits that make up the conversion kits?
Thanks
Where can i get spares for the Kawahara conversion kit? Anybody know the indevidual part numbers for the bits that make up the conversion kits?
Thanks