Gas Sedan Nats. Toledo, Ohio
#167
Full results for all Mains but for the Masters B-Main, and the equipment usage table are now posted on sgrid, http://www.rc-racing.com/cgi-bin/bac...peek:sgrid8,97
Pictures and race report will be posted tomorrow, Wednesday at the latest.
Pictures and race report will be posted tomorrow, Wednesday at the latest.
#168
Tech Regular
Dave2004,
Nope, that’s the same car. We just cleaned it up for the pictures. I swapped heads, orange just clashed with the purple.
I also would like to thank the track staff and tech team for a very professionally run event. Tech was done very efficiently.
It was unfortunate what happened to Mike Swauger. His car was definitely putting down some serious power. He was in the lead with 9 to go and then…the unthinkable. He is a great sportsman/driver.
Despite some interesting behavior from a few racers/teams I had a great time.
Nope, that’s the same car. We just cleaned it up for the pictures. I swapped heads, orange just clashed with the purple.
I also would like to thank the track staff and tech team for a very professionally run event. Tech was done very efficiently.
It was unfortunate what happened to Mike Swauger. His car was definitely putting down some serious power. He was in the lead with 9 to go and then…the unthinkable. He is a great sportsman/driver.
Despite some interesting behavior from a few racers/teams I had a great time.
#169
Originally posted by mikemyers
Full results for all Mains but for the Masters B-Main, and the equipment usage table are now posted on sgrid, http://www.rc-racing.com/cgi-bin/bac...peek:sgrid8,97
Full results for all Mains but for the Masters B-Main, and the equipment usage table are now posted on sgrid, http://www.rc-racing.com/cgi-bin/bac...peek:sgrid8,97
Strange that no one in the A main used the JP FX engine. Those who used JP engines were using the X12 version... Or is it a typo error?
EQUIPMENT USED
Name Chassis Engine Pipe Tires
Mike Swauger Mugen MTX-3 JP X-12 Mugen Kawahara
Barry Baker Associated NTC3 LRP Associate Jaco
Atsushi Hara HPI R40 Maxy RD Logic Orion
Josh Cyrul Kyosho FW05R Werks LC Mod RD Logic Jaco
Mike Blackstock Associated NTC3 O'Donnell REX Associated Jaco
Kyle Skidmore Associated NTC3 JP XR12 Associated Jaco
Paul Cicarello Team Magic G4 JP X12 RB Arrows
Chris Tosolini Kyosho FW05R Sirio RD Logics Twister
Brian Berry Serpent WOA710 Mega Mega Ellegi
Ron Atomic Kyosho FW05R OS R Spec Kyosho Mono Tuning
Brandon McNally Serpent WOA710 Mega Mega Ellegi
Jeffrey Lin OFNA CD3 RB OFNA Jaco
#170
I like Mr. Swauger's taste in rubber.
#171
R.Speed for Life...
@Barry: great to hear you ran "her" at the Nats...
Too bad you broke in the final, but you'll have better luck at Worlds! We keep in touch on that...
Congratulations to Hara-San, his pit-crew "the army of one", HPI, etc...
Too bad you broke in the final, but you'll have better luck at Worlds! We keep in touch on that...
Congratulations to Hara-San, his pit-crew "the army of one", HPI, etc...
#172
Great to see (3)Kyosho's in the final.
That was unheard of about one year ago at a national event. Finally got some great drivers to represent.
Also great to see an Ofna car in the final too. Ofna's not to be taken lightly anymore with their performances at the nats and the 1/8 Worlds.
Excellent mix of brands(cars and engines) overall.
That was unheard of about one year ago at a national event. Finally got some great drivers to represent.
Also great to see an Ofna car in the final too. Ofna's not to be taken lightly anymore with their performances at the nats and the 1/8 Worlds.
Excellent mix of brands(cars and engines) overall.
#173
The Worlds is going to be huge. Full factory teams, more teams than at any other R.C. event, all for 200mm nitro cars.
Beware the big K, they pretty much created the class and have invested heaps in promoting it at a grass roots level. They want it badly.
I'd really like some information if anyone would care to respond.
I understand the reasoning behind the one hour final but were there battery capacity issues?
How did the cars vary from IFMAR's specifications?
Did any cars make a tyre change?
There were some fifteen laps seperating 2nd and third, did only two cars have a problem free final?
Beware the big K, they pretty much created the class and have invested heaps in promoting it at a grass roots level. They want it badly.
I'd really like some information if anyone would care to respond.
I understand the reasoning behind the one hour final but were there battery capacity issues?
How did the cars vary from IFMAR's specifications?
Did any cars make a tyre change?
There were some fifteen laps seperating 2nd and third, did only two cars have a problem free final?
#174
Tech Adept
iTrader: (21)
Join Date: Sep 2002
Location: Sao Jose dos Campos - SP - Brazil
Posts: 207
Trader Rating: 21 (100%+)
Originally posted by Mike Blackstock
Ted....
I could not agree more about the club with the great job done by them all... ..
Also bobby run was awesome to watch... I know this being my first ever hour long main i was beat so i could not imagine how he was doing ;-)
As for my main it could not have been better .. Small bobble here or there or it might have been a different out come..
I found out before the main my chassis was like a pretzel and did not even realize it as all through Quals my car was pushing like crazy compared to practice where i thought i had a chance at TQ but once i put a new one on for the main it turned too much and we needed to put a front bar on it during the 10 min warmup then she was a missle....
Thanks again to the club for a fun time...
Mike
Ted....
I could not agree more about the club with the great job done by them all... ..
Also bobby run was awesome to watch... I know this being my first ever hour long main i was beat so i could not imagine how he was doing ;-)
As for my main it could not have been better .. Small bobble here or there or it might have been a different out come..
I found out before the main my chassis was like a pretzel and did not even realize it as all through Quals my car was pushing like crazy compared to practice where i thought i had a chance at TQ but once i put a new one on for the main it turned too much and we needed to put a front bar on it during the 10 min warmup then she was a missle....
Thanks again to the club for a fun time...
Mike
Are you coming to the Worlds in Brazil?
#175
Maxy's Fuel
I would just like to thank all the guys that support Maxy's Fuel. It is because of you that we are still running. It was a challening event and we are glad that we pulled through.
Hara, apart from being an excellent driver, is also a great person and very proffesional. We could have had more potency in our engine but as a team we dicided that consintecy is the key. The motor finished at 190 degrees (we still had pit stops only every 5 mins) and all tires ended at 53 mm width. Thats resulted in a slower pace during the last ten minutes in the straight away but it was much faster at in-field.
We would also like to thank Thad, Hara's mechanic, I feel that we made a great team in the pit.
Maxy's Fuel/Orion Fuel and Maxy's Modified Engines
Roar's National Champion
Hara, apart from being an excellent driver, is also a great person and very proffesional. We could have had more potency in our engine but as a team we dicided that consintecy is the key. The motor finished at 190 degrees (we still had pit stops only every 5 mins) and all tires ended at 53 mm width. Thats resulted in a slower pace during the last ten minutes in the straight away but it was much faster at in-field.
We would also like to thank Thad, Hara's mechanic, I feel that we made a great team in the pit.
Maxy's Fuel/Orion Fuel and Maxy's Modified Engines
Roar's National Champion
#176
Suspended
PICTURES
WHERE ARE THE PICS?
#177
Re: Maxy's Fuel
Originally posted by maxysfuel
I would just like to thank all the guys that support Maxy's Fuel. It is because of you that we are still running. It was a challening event and we are glad that we pulled through.
Hara, apart from being an excellent driver, is also a great person and very proffesional. We could have had more potency in our engine but as a team we dicided that consintecy is the key. The motor finished at 190 degrees (we still had pit stops only every 5 mins) and all tires ended at 53 mm width. Thats resulted in a slower pace during the last ten minutes in the straight away but it was much faster at in-field.
We would also like to thank Thad, Hara's mechanic, I feel that we made a great team in the pit.
Maxy's Fuel/Orion Fuel and Maxy's Modified Engines
Roar's National Champion
I would just like to thank all the guys that support Maxy's Fuel. It is because of you that we are still running. It was a challening event and we are glad that we pulled through.
Hara, apart from being an excellent driver, is also a great person and very proffesional. We could have had more potency in our engine but as a team we dicided that consintecy is the key. The motor finished at 190 degrees (we still had pit stops only every 5 mins) and all tires ended at 53 mm width. Thats resulted in a slower pace during the last ten minutes in the straight away but it was much faster at in-field.
We would also like to thank Thad, Hara's mechanic, I feel that we made a great team in the pit.
Maxy's Fuel/Orion Fuel and Maxy's Modified Engines
Roar's National Champion
Brother, my sincere congratulations for this deserved success. I'm witness of your beginnings and your continuos efforts to get were you are now.
Keep it up man
Saludos
Alfonso
#178
Originally posted by rjl
The Worlds is going to be huge. Full factory teams, more teams than at any other R.C. event, all for 200mm nitro cars.
Beware the big K, they pretty much created the class and have invested heaps in promoting it at a grass roots level. They want it badly.
I'd really like some information if anyone would care to respond.
I understand the reasoning behind the one hour final but were there battery capacity issues?
How did the cars vary from IFMAR's specifications?
Did any cars make a tyre change?
There were some fifteen laps seperating 2nd and third, did only two cars have a problem free final?
The Worlds is going to be huge. Full factory teams, more teams than at any other R.C. event, all for 200mm nitro cars.
Beware the big K, they pretty much created the class and have invested heaps in promoting it at a grass roots level. They want it badly.
I'd really like some information if anyone would care to respond.
I understand the reasoning behind the one hour final but were there battery capacity issues?
How did the cars vary from IFMAR's specifications?
Did any cars make a tyre change?
There were some fifteen laps seperating 2nd and third, did only two cars have a problem free final?
-Kevin
#179
How do you go about setup for a race this long? Do you run bigger tires? Or raise your ride height? Or run harder tires and give up a little grip?. Just wondering cuz I've never done a one hour main.
#180
Re: Maxy's Fuel
What is the Maxy's Modified engine based from? Not a whole new engine line, is it?
Originally posted by maxysfuel
Maxy's Fuel/Orion Fuel and Maxy's Modified Engines
Roar's National Champion
Maxy's Fuel/Orion Fuel and Maxy's Modified Engines
Roar's National Champion