MBX5 Prospec.
#1
Tech Elite
Thread Starter
iTrader: (45)
Join Date: Jun 2003
Location: Somewhere in Penang Island, Malaysia
Posts: 3,495
Trader Rating: 45 (98%+)
MBX5 Prospec.
Hi all, I have problem on my MBX5. She understeer , what are the thing I need to adjust, please advise as I am new on buggy. Thanks in advance.
#2
Your sig states you run touring car. I am new to RC all together but I use a friends hudy touring car setup guide (it comes with the setup station). The same priciples carry over from touring to off road.
#3
Tech Elite
Thread Starter
iTrader: (45)
Join Date: Jun 2003
Location: Somewhere in Penang Island, Malaysia
Posts: 3,495
Trader Rating: 45 (98%+)
Hi you mean using 1/10 setup station to setup the buggy? If yes, so what should I adjust for to make it not too understeer.........Thanks.
#4
He means a book that comes with the setup station its a guide for setup changes.
Does the car lack turn in? push under power? In the fast sweepers or tight sections?
Post some of you setup in the car. Mainly diff oils, toe & camber settings. Shock locations. And a big one is do you have the right tires?
Does the car lack turn in? push under power? In the fast sweepers or tight sections?
Post some of you setup in the car. Mainly diff oils, toe & camber settings. Shock locations. And a big one is do you have the right tires?
#5
Tech Elite
Thread Starter
iTrader: (45)
Join Date: Jun 2003
Location: Somewhere in Penang Island, Malaysia
Posts: 3,495
Trader Rating: 45 (98%+)
He means a book that comes with the setup station its a guide for setup changes.
Does the car lack turn in? push under power? In the fast sweepers or tight sections?
Post some of you setup in the car. Mainly diff oils, toe & camber settings. Shock locations. And a big one is do you have the right tires?
Does the car lack turn in? push under power? In the fast sweepers or tight sections?
Post some of you setup in the car. Mainly diff oils, toe & camber settings. Shock locations. And a big one is do you have the right tires?
By the way I am newbie on buggy......I bought her 2nd hand and dunno all the setting as well. I just bashing around sandy field and when turn it take big round to turn.......So can you advise what is best diff oil I need on F/M/R and I try to change and the chamber and toe I needed. thanks in advance.
#6
Diff oils start with 5k-5k-2k. Shock oils 35wt front 40wt rear. Make sure you have a decent servo and the servo saver is set correctly this can cause a major lack of steering. Camber start with -1.5 front -2.5 rear. Toe out 1degree in the front. Front caster shims middle. Rear toe 2.5degree.
#8
Tech Elite
Thread Starter
iTrader: (45)
Join Date: Jun 2003
Location: Somewhere in Penang Island, Malaysia
Posts: 3,495
Trader Rating: 45 (98%+)
Diff oils start with 5k-5k-2k. Shock oils 35wt front 40wt rear. Make sure you have a decent servo and the servo saver is set correctly this can cause a major lack of steering. Camber start with -1.5 front -2.5 rear. Toe out 1degree in the front. Front caster shims middle. Rear toe 2.5degree.
#9
Tech Elite
Thread Starter
iTrader: (45)
Join Date: Jun 2003
Location: Somewhere in Penang Island, Malaysia
Posts: 3,495
Trader Rating: 45 (98%+)
#10
Tech Initiate
Hi guys, I have a brand-new in the box MBX-5 before I put it together I would like to install all the part to make it prospec, can you tell me what parts I would need . or where I can go to find out. Or even a hobby shop that might have a package deal for it. Or if somebody could tell me the parts.I wouldn't appreciate it. Thank you where
#11
#12
Tech Initiate
Turbine, What can I say. Thank you. Great.
#13
aaaaaaaaaaaaaaaa