MOTOR RUN IN ON ICE CHARGER
#2
Tech Champion
iTrader: (30)
what kind of motor and what kind of amp draw was the motor pulling? How big is your power supply?
even on the other chargers like a gfx or t35, a motor that pulls a "large" amount of amps, will "shut it down"
yesterday, i was able to get a mod motor up to 6 amps before it stopped...because the motor wasn't pulling a ton of amps - I think like 7
even on the other chargers like a gfx or t35, a motor that pulls a "large" amount of amps, will "shut it down"
yesterday, i was able to get a mod motor up to 6 amps before it stopped...because the motor wasn't pulling a ton of amps - I think like 7
#3
The Ice will shut down if the motor pulls more than 10 amps. Check the amp draw and see if it is more than 10 amps.
John
John
#4
Tech Elite
Join Date: Mar 2004
Location: MOOD;; feeling good not racing ,saving shed loads of money,lovely Tan i have aswell
Posts: 4,762
Originally Posted by 20 SMOKE
I tried mine over the weekend and can only run motors at 2 volts any higher it shuts down anyone have this problem
in display it will say ` motor disconnected`
motor is pulling to many amps for machine
how many amps is it showing @1.5v ??
#6
Tech Elite
Join Date: Mar 2004
Location: MOOD;; feeling good not racing ,saving shed loads of money,lovely Tan i have aswell
Posts: 4,762
if the KD is pulling 9 amps @1.5v as soon as you go up to 2.v it will trip the ICE @10+ amps