RDLogics Web site updates- NTC3, and Pipe
03-30-2003, 12:27 AM
#151
Originally posted by jwf_frani
mine is fine you guys need to check if any thing else in the
car is bent like your pivot balls or any thing else because
90 percent of the locals here run the diff cases and i have
not heard of that problem. the only issue that was brought
to my attention was bearing fit that was easily solve with reshim
ing or just a little clean up of the paint where the bearing sit.
mine is fine you guys need to check if any thing else in the
car is bent like your pivot balls or any thing else because
90 percent of the locals here run the diff cases and i have
not heard of that problem. the only issue that was brought
to my attention was bearing fit that was easily solve with reshim
ing or just a little clean up of the paint where the bearing sit.
i put the ae shock tower on and the caster is fine, then i put the rd shock tower on and its all over the place
i didnt notice it neither untill i cheked the caster on my setup board
becasue we think if the clips are in the right place he caster must be right
what can i do ??????
03-30-2003, 03:20 AM
#152
Tech Addict
Originally posted by tennessee
Hey ken , they're is'nt any pictures of the new .12 turbo legal pipe on the RD-LOGICS web site
Hey ken , they're is'nt any pictures of the new .12 turbo legal pipe on the RD-LOGICS web site
03-30-2003, 04:23 AM
#153
Tech Addict
Well, this is interesting, I didn't know there was a forum where it was possible to speak with reps from RDLogics! First and formost, let me thank you for a great product. I use your one-piece pipe for my RS4 3 and absolutely love it. For the price, the quality can't be beat. Unfortunately, after the first couple of weeks owning it, someone broadsided me in a race and hella bent the header. Now the header doesn't make a proper seal around the area where it attaches to the engine and it leaks out oil all over the car let alone performance suffers. I fixed it by using some gasket sealant around the header, but I don't want to do that everytime I need to take off my header for normal car maintanence. I've emailed RDLogics when this problem first arose and never recieved a reply. I'm not looking for free parts, I just want to buy the header for my specific pipe. For the RDLogics reps in this forum, is it possible for me to purchase just the header and not a whole new pipe set?
03-30-2003, 07:57 AM
#154
I will get back with you on that.
03-30-2003, 08:01 AM
#155
Originally posted by tekrsq
Huh??? Isn't it the 61215L?? I just ordered that pipe because I thought it was the one you and Brad are running. Which one are you guys using? If I got the wrong pipe, I need to see if I can exchange it for the correct one.
Huh??? Isn't it the 61215L?? I just ordered that pipe because I thought it was the one you and Brad are running. Which one are you guys using? If I got the wrong pipe, I need to see if I can exchange it for the correct one.
03-30-2003, 08:52 AM
#156
Tech Regular
Originally posted by Brett
sorry but the blame is still on the rd parts
i put the ae shock tower on and the caster is fine, then i put the rd shock tower on and its all over the place
i didnt notice it neither untill i cheked the caster on my setup board
becasue we think if the clips are in the right place he caster must be right
what can i do ??????
sorry but the blame is still on the rd parts
i put the ae shock tower on and the caster is fine, then i put the rd shock tower on and its all over the place
i didnt notice it neither untill i cheked the caster on my setup board
becasue we think if the clips are in the right place he caster must be right
what can i do ??????
03-30-2003, 09:12 AM
#157
Tech Addict
THANKS!!!!! Tennessee...That makes me feel better.
RDL admin- please disregard my e-mail.
RDL admin- please disregard my e-mail.
03-30-2003, 09:18 AM
#158
Tech Regular
Hmm... I ordered the 61255
03-30-2003, 09:24 AM
#159
Originally posted by simonfdr
Hmm... I ordered the 61255
Hmm... I ordered the 61255
Last edited by tennessee; 03-30-2003 at 10:24 AM.
03-30-2003, 09:33 AM
#160
Tech Regular
Oh.
03-30-2003, 09:52 AM
#161
Tech Apprentice
Originally posted by Laterilus
Well, this is interesting, I didn't know there was a forum where it was possible to speak with reps from RDLogics! First and formost, let me thank you for a great product. I use your one-piece pipe for my RS4 3 and absolutely love it. For the price, the quality can't be beat. Unfortunately, after the first couple of weeks owning it, someone broadsided me in a race and hella bent the header. Now the header doesn't make a proper seal around the area where it attaches to the engine and it leaks out oil all over the car let alone performance suffers. I fixed it by using some gasket sealant around the header, but I don't want to do that everytime I need to take off my header for normal car maintanence. I've emailed RDLogics when this problem first arose and never recieved a reply. I'm not looking for free parts, I just want to buy the header for my specific pipe. For the RDLogics reps in this forum, is it possible for me to purchase just the header and not a whole new pipe set?
Well, this is interesting, I didn't know there was a forum where it was possible to speak with reps from RDLogics! First and formost, let me thank you for a great product. I use your one-piece pipe for my RS4 3 and absolutely love it. For the price, the quality can't be beat. Unfortunately, after the first couple of weeks owning it, someone broadsided me in a race and hella bent the header. Now the header doesn't make a proper seal around the area where it attaches to the engine and it leaks out oil all over the car let alone performance suffers. I fixed it by using some gasket sealant around the header, but I don't want to do that everytime I need to take off my header for normal car maintanence. I've emailed RDLogics when this problem first arose and never recieved a reply. I'm not looking for free parts, I just want to buy the header for my specific pipe. For the RDLogics reps in this forum, is it possible for me to purchase just the header and not a whole new pipe set?
Thanks
http://www.rdlogics.com/store/C_28.htm
03-30-2003, 09:57 AM
#162
Tech Apprentice
Originally posted by tennessee
Thats the same one that we are running
Thats the same one that we are running
here is the link for the picture:
http://www.rdlogics.com/Turbo%201pc.JPG
03-30-2003, 10:01 AM
#163
Tech Apprentice
Originally posted by Brett
sorry but the blame is still on the rd parts
i put the ae shock tower on and the caster is fine, then i put the rd shock tower on and its all over the place
i didnt notice it neither untill i cheked the caster on my setup board
becasue we think if the clips are in the right place he caster must be right
what can i do ??????
sorry but the blame is still on the rd parts
i put the ae shock tower on and the caster is fine, then i put the rd shock tower on and its all over the place
i didnt notice it neither untill i cheked the caster on my setup board
becasue we think if the clips are in the right place he caster must be right
what can i do ??????
We will double check. It is the first time we heard about this issuse.
Please email to [email protected].
Thanks
03-30-2003, 02:55 PM
#164
Thanks Ken for answering that
03-30-2003, 10:54 PM
#165
Originally posted by rdlken
Hi, Bett:
We will double check. It is the first time we heard about this issuse.
Please email to [email protected].
Thanks
Hi, Bett:
We will double check. It is the first time we heard about this issuse.
Please email to [email protected].
Thanks