Randy Caster

iTrader: (47)

My motor and battery + wire is the same wire...

rc-zombies

iTrader: (9)

mine too...try it on different wires and see what works best to eliminate your glitching.... you might also need a larger diode? do you have the Novak shottcki?

Randy Caster

iTrader: (47)

I dont have a novak shotky, but it wouldnt be hard to get one... I gotta get to the track first. I want to test it without anything, then I'll add as needed.

wolfeman09

MB > Bring it!!! I will be racing this Sunday in La Mirada. Get there early for me and save a space for me

Car is all set, wish I had more than the one Fukuyama pack that I have. Running Stock and 19T.

See you all there...

RCsilly

Hey guys,
I run stock 1/12th , and have some killer Fuku cells that I got for Cleveland , they are awesome cells and I don't want to hurt them. My question is ..... the guys want to run MOD this weekend and I want to know since these cells are trained for stock racing , will running them in MOD for one weekend do any damage to them ? Could it make them better ? or should I run some of my older stuff and keep the good stuff for stock ?
Thanks
Bob

Herminator

Some one's PM box is full again

John Fontaine

iTrader: (2)

Running mod for a pack won't hurt them. Afterall, they were trained orginally at 30 amps which is closer to mod than stock racing. Charge at 5 amps instead of 6 and you'll be fine. Happy racing.

Herminator - Who's mailbox is full?

howard hudson

I think its Dans

Herminator

Yup, Dan's
He's obviously a busy man

Hardriven RC

Guys,

I've been reading this forum over the last few days. If even half of what you guys say about these Fukuyama packs is true then i want some. Only trouble is that they are never in stock. Even the Power cube, wich a friend asked me to order, isn't availeble. Now pushing a product is all fine and well, but stop ranting on about this so people lose interest and i can finaly get some.

Hardriven RC

Al joking appart now,

How can i get some of these packs? And when will they be back in stock?

Jon Kerr

iTrader: (17)

I know Dan said they have a good batch of cell that they think will be producing good numbers. He's at the Snowbirds right now but will be back next week. Give him a call next week. I bet he'll be able to get you set up with some good stuff.

All the matchers are having trouble right now getting bigger numbers out of these shorter cells. I've got some 1.165 practice packs with the shorter cells and they seem to be very strong so far. They only have a couple runs on them so I'll know more soon but I've heard from some guys that the shorter cell, eventhough they're giving lower numbers, are performing just as well as the higher numbers on the older cells. I'll have to run them some more to confirm that though.

Randy Caster

iTrader: (47)

You can also try SpeedtechRC.com as a backup source, they carry Fukuyama as well.

Hardriven RC

Thanks for the info, but they are out to.
I'll just have to wait for the Fukuyama guys to return from the Snowbirds.

Randy Caster

iTrader: (47)

Dan is at Snowbirds, but everyone else should be at the shop still...