Arizona RC Swap Meet
#3302
I haven't been on for a couple weeks due to my dads passing, but want to put this back up here. Locals get $20 off if picked up.
This started as a v1 but it has all the goodies on it. Recently gone threw and replace worn bearings and drive shafts.
Alum hinge pin holders all around
RPM front arms
Sway bars
Wight kit
rear diff braces
center gear diff
comes with
Novak Havoc Pro SC w/ xdrive
Novak 4.5 motor
Hitec HS985MG servo
$450 ARTR with saddle pack and a good set of wheels. NO RECEIVER
$300 with motor - NO ESC or SERVO
$250 roller ONLY - with body and tires shown
This started as a v1 but it has all the goodies on it. Recently gone threw and replace worn bearings and drive shafts.
Alum hinge pin holders all around
RPM front arms
Sway bars
Wight kit
rear diff braces
center gear diff
comes with
Novak Havoc Pro SC w/ xdrive
Novak 4.5 motor
Hitec HS985MG servo
$450 ARTR with saddle pack and a good set of wheels. NO RECEIVER
$300 with motor - NO ESC or SERVO
$250 roller ONLY - with body and tires shown
#3305
Suspended
If anyone is looking for a nice 1/8 nitro buggy let me know. I have a 2011 agama a8 evo roller for sale has all the 2012 upgrades brand new in the packages except the chassis its the standard chassis not the +4. I would like to get 200 for it. It will also come with a CRE B5 engine that needs a pinch has about 8 gallons on it. 602 527 1676
I also have an ofna blue top starter box almost new- 65
I also have an ofna blue top starter box almost new- 65
#3306
Tech Initiate
iTrader: (1)
SC10 2wd RTR chassis converted to Jconcepts hex all around, RPM front arms and bumper/chassis brace. Body included. No tires(SLIDER). $90 OBO
RTR tires and Proline Split-six wheels. $20
Pair of mounted subcultures on KMC wheels (SC10 RS rear tires). $10
Stock Associated RTR Transmitter and reciever. $30
Castle Creations Mamba Max Pro. Less than one year old. Only ran on 2s. Never overheated. $90 OBO
3500kv HobbyWing Sensorless motor $10
http://phoenix.craigslist.org/evl/tag/3718736909.html
BUMP for flakes
RTR tires and Proline Split-six wheels. $20
Pair of mounted subcultures on KMC wheels (SC10 RS rear tires). $10
Stock Associated RTR Transmitter and reciever. $30
Castle Creations Mamba Max Pro. Less than one year old. Only ran on 2s. Never overheated. $90 OBO
3500kv HobbyWing Sensorless motor $10
http://phoenix.craigslist.org/evl/tag/3718736909.html
BUMP for flakes
#3307
Tech Prophet
iTrader: (84)
I am cutting back even more. So I am selling off some more stuff. I will be at Competition hobbies sunday for the phx guys.
Promatch 4000 65c $40
Smc 4600 70c $45
Viper vtx10r $140
Airtronics 94360 $35 (This server has had its lead shorten a little, but is in perfect working order.)
Airtronics 94357 $40 (Nothing wrong with the servo, it has always been a work horse)
pm me for picks. The batteries are not puffed or cracked. The smc was only used 1 weekend and the promatch is still in great shape. I cycled both packs on my hyperion charger and the promatch actually has a lower ir than the smc. the vtx10r has the black caps and the latest firmware.
Uploaded with ImageShack.us
Promatch 4000 65c $40
Smc 4600 70c $45
Viper vtx10r $140
Airtronics 94360 $35 (This server has had its lead shorten a little, but is in perfect working order.)
Airtronics 94357 $40 (Nothing wrong with the servo, it has always been a work horse)
pm me for picks. The batteries are not puffed or cracked. The smc was only used 1 weekend and the promatch is still in great shape. I cycled both packs on my hyperion charger and the promatch actually has a lower ir than the smc. the vtx10r has the black caps and the latest firmware.
Uploaded with ImageShack.us
Last edited by Wildcat1971; 04-04-2013 at 08:14 PM.
#3308
Tech Apprentice
this is a 3 race old chassis everything else is brand new
selling as rollar with scrubs up front and de wheels brand new tires
has kings rack
carbon fiber rear tower ears
extra full set of a-arms
and stock shower tower ears also has 2 extra rocket front shock tower to conver to late model
new body and cage 225 firm..........
or buy rtr with a hobbypeople servo specs are .15 @ 220z brand new
edge esc with a 17.5 ss motor or a 13.5 dirt oval spec motor both brand new never used just wired up (i have orginal box and recipt for warrenty) bought on march 1 2013
asking 425 firm
selling as rollar with scrubs up front and de wheels brand new tires
has kings rack
carbon fiber rear tower ears
extra full set of a-arms
and stock shower tower ears also has 2 extra rocket front shock tower to conver to late model
new body and cage 225 firm..........
or buy rtr with a hobbypeople servo specs are .15 @ 220z brand new
edge esc with a 17.5 ss motor or a 13.5 dirt oval spec motor both brand new never used just wired up (i have orginal box and recipt for warrenty) bought on march 1 2013
asking 425 firm
#3309
slash roller
i have a slash roller up for sale trans case is broken where the rear arm connects. have a whole other transmission for it as well as extra chassis and extra chassis braces, extra springs, aluminum shock caps and comes with venom 4200kv brushless motor. worn tires but drivable and beat up body. was my 5 year olds but moved him up to a sc10. 80$ local pick up. make offer.
#3310
b4.1 roller in fantastic shape, has stock servo, $100 pic in ad...need it gone
http://phoenix.craigslist.org/wvl/tag/3717332172.html
http://phoenix.craigslist.org/wvl/tag/3717332172.html
#3311
THREE RC18s
Selling my three RC18s as a package.
Includes:
2 RC18s, both with BRUSHLESS motor/esc setup. (Both motors are Hacker.) Both very quick. Ready to run.
1 RC18B. This is a 95% done project. Stock motor and ESC. It has run, but needs a new steering servo/servo saver.
1 Associated Tx and Rx
1 Almost new Flysky 2.4 ghz radio and two receivers
box of misc spares including some batteries, etc.
Selling as package (all together only). Asking $225. ---> PRICE DROP TO $150 local.
PayPal or cash only.
PM me if interested. Thanks!
Includes:
2 RC18s, both with BRUSHLESS motor/esc setup. (Both motors are Hacker.) Both very quick. Ready to run.
1 RC18B. This is a 95% done project. Stock motor and ESC. It has run, but needs a new steering servo/servo saver.
1 Associated Tx and Rx
1 Almost new Flysky 2.4 ghz radio and two receivers
box of misc spares including some batteries, etc.
Selling as package (all together only). Asking $225. ---> PRICE DROP TO $150 local.
PayPal or cash only.
PM me if interested. Thanks!
Last edited by btsai; 04-09-2013 at 04:51 PM.
#3313
i have a slash roller up for sale trans case is broken where the rear arm connects. have a whole other transmission for it as well as extra chassis and extra chassis braces, extra springs, aluminum shock caps and comes with venom 4200kv brushless motor. worn tires but drivable and beat up body. was my 5 year olds but moved him up to a sc10. 80$ local pick up. make offer.
#3314
b4.1 roller in fantastic shape, has stock servo, $100 pic in ad...need it gone
http://phoenix.craigslist.org/wvl/tag/3717332172.html
http://phoenix.craigslist.org/wvl/tag/3717332172.html
#3315
Tech Apprentice
looking for a sc10 roller must have good tires on it please pm me or text me at 623 498 7372