Propchecku37

iTrader: (73)

What steering servo is reccomended for 1/8 buggy using a Tekin rx8 Esc and not having to worry about any glitch issues.

EbbTide

iTrader: (39)

The xpert 4000 series servo is an awesome deal at only $80 for over 250oz of torque and speeds up to .07/sec

There is also the Associated DS1015 which I currently have in my ebuggy and is still plenty of torque to move the wheels at speed.

Cain

iTrader: (294)

I pretty much would do at a minimum 250oz or higher torque and .13 sec transit or faster.

Variety of good servos out there that will fit that requirement.

rcgod

iTrader: (33)

Check out the protek 130t or 130ss. Price is about $90 last I looked and specs are great.

Rather Race

iTrader: (5)

Futaba servo's is what i use and never had any glitch issues.

Zerodefect

Hitec 7950.

I can vouch for the 7955 and 7954 as well. Haven't tried the uber high end brushless new servos yet.

hoyt1967

iTrader: (36)

I will 2nd the protek's. I have a 130t in my ebuggy and a 150t in truggy, both are glitch free, and I run tekin RX8's in both also.

1/8 IC Fan

iTrader: (102)

+1 for Protek.

I have also run the Protek 130T in the Buggy, for both steering and brake / throttle. Great servo, no issues, runs like a champ. No Noise, no Chatter, reliable.

Now I am running the Protek 170T's for both throttle / brake and steering. - overkill, just wanted to try them.

Propchecku37

iTrader: (73)

Great info guys, I'm going to try a Protek 130T..

racerkilla

iTrader: (17)

I run ds8711 in all 6 of my 1/8 buggy and truggy steering. I happen to get a great deal on 9 new ones. At 140 new retail I think I would of tried to find something a bit cheaper though. 400 oz of torque is great though