VTA, Club TC Racing ETC - Best, Highly Supported, Cheap Kit?
#1
VTA, Club TC Racing ETC - Best, Highly Supported, Cheap Kit?
Ive been looking at:
Xray T3R
Associate TC4
Sakura Zero S
Those three, by price.
I would like to get a few VTA bodies, some TC bodies etc and just play/race have fun in an on road small carpet setup.
Anyone have input for me?
Xray T3R
Associate TC4
Sakura Zero S
Those three, by price.
I would like to get a few VTA bodies, some TC bodies etc and just play/race have fun in an on road small carpet setup.
Anyone have input for me?
#3
I'd look at the X-ray myself. Here is a local one for sale. I can vouch for this car and seller, it is fast, and you won't find a car that has been better taken care of. It has all the upgrades too like gear diff, nicer axels, etc...
http://www.rctech.net/forum/r-c-item...plete-bnd.html
#5
We have everything running at our track from t3's to tc3's. It really comes down to setup as far as success goes. I have found the X-rays to be very easy to setup. They also are the strongest cars on our track. We take some hard hits and I Hardly see an X-ray being picked up off the track due to broken parts. Can't say the same for AE and the other brands you mentioned.
I'd look at the X-ray myself. Here is a local one for sale. I can vouch for this car and seller, it is fast, and you won't find a car that has been better taken care of. It has all the upgrades too like gear diff, nicer axels, etc...
http://www.rctech.net/forum/r-c-item...plete-bnd.html
I'd look at the X-ray myself. Here is a local one for sale. I can vouch for this car and seller, it is fast, and you won't find a car that has been better taken care of. It has all the upgrades too like gear diff, nicer axels, etc...
http://www.rctech.net/forum/r-c-item...plete-bnd.html
I think the XRay would be good to.
#6
Tech Regular
iTrader: (6)
I have the zero S and have run it in VTA. Car went well, no breakages. My 6 year old now run the same chassis in novice and it takes a fair beating trust me... The problem with a cheaper chassis is that the electrics, bodies and tires are not really that cheap. lol. the bodies would be the worst part as they all look so good you want them all
#7
Tech Lord
iTrader: (3)
For brand new, the Associated TC4 racer chassis is the best bang for the buck. Every hobby shop can get Associated parts, and there's years of setup help for this car.
A used model of a newer car is also good, just make sure you can get parts for it easily. This is also the better option if you intend on moving up to a faster class.
A used model of a newer car is also good, just make sure you can get parts for it easily. This is also the better option if you intend on moving up to a faster class.
#8
Look into what everyone at your track is running. It makes getting parts easy. Also look into the price of replacement parts. I hear the Xray's part are a lot more than the TC4's.
I picked up a clean TC5 and for a first car it has been good car to learn about set up.
I picked up a clean TC5 and for a first car it has been good car to learn about set up.
#10
Tech Master
More adjustments and better durability. JMHO...
#11
Tech Elite
iTrader: (30)
The Zero S is what I would suggest. I have seen quite a few these cars run VTA at a carpet facility here in FL and they are very, very competitive. Some have put on a few upgrades, but from what you mentioned of your intentions, I think you'd be very satisfied with it. Most racers are going to be inclined to give the nod to the xray but for VTA purposes and for keeping the cost down, the Zero S will be just fine.
If you visit the Florida forum and search for the Florida Indoor R/C complex, you'll see the Zero S guys (which is a great group of racers) and I'm sure they'll be willing to give you some proven set-ups.
If you visit the Florida forum and search for the Florida Indoor R/C complex, you'll see the Zero S guys (which is a great group of racers) and I'm sure they'll be willing to give you some proven set-ups.
#12
Additionally, if you are using PayPal, you should be covered if the items aren't as listed.
#13
Yes, the. X-ray parts are more expensive than others, but my experience is that they don't break as much. I have been running my t3 for almost a year and. Haven't broken anything. The only thing that has taken me out of a race is a drive pin I didn't loctite.
The best advice is to get a car that will get you racing, and keep you racing. If you get and X-ray (which I recommend) but your local shop can't get parts than you aren't racing. Same goes for the other chassis mentioned. I would take a tc5 over the 4, but that is just me. I didn't like the way the tc4 drove and setup. My X-ray is much nicer in that regard.
Also, keep in mind the cost of putting a car together start to finish, the price can add up quick. If you buy a nice used car you an get racing that much faster. Just another plug for the above mentioned setup. He has been raing for longer than I have been alive and takes care of his stuff.
The best advice is to get a car that will get you racing, and keep you racing. If you get and X-ray (which I recommend) but your local shop can't get parts than you aren't racing. Same goes for the other chassis mentioned. I would take a tc5 over the 4, but that is just me. I didn't like the way the tc4 drove and setup. My X-ray is much nicer in that regard.
Also, keep in mind the cost of putting a car together start to finish, the price can add up quick. If you buy a nice used car you an get racing that much faster. Just another plug for the above mentioned setup. He has been raing for longer than I have been alive and takes care of his stuff.
#15
Tech Regular
yup..... buy some ones used xray car thats all tweak out....? y?
when you can buy a new car
a tc4 is a very old car with old tecknowledge and lots of parts to be had
if it was me Sakura Zero S would be the way to go . parts are a lot cheaper
when you can buy a new car
a tc4 is a very old car with old tecknowledge and lots of parts to be had
if it was me Sakura Zero S would be the way to go . parts are a lot cheaper