HoBao Hyper 9E thread
#2132
Registered User
iTrader: (8)
The problem is NO one voices when their car/s are stuck on the straight.and by the time I got close it was too late
Last edited by shano83; 10-04-2010 at 05:17 AM.
#2134
Steel eh.......Never needed that on my Matrix set-up's.
#2135
Tech Adept
Shano, one minute you say those pics of the broken carbon chassis are not from Moosracing...and the next minute you say it was from Moosracing and now he's going to put steel in the front. Just be honest with us because many of us trying to figure out which carbon chassis to buy. IMO, I don't want a chassis that can be torn apart like your pics show, and I would rather not have a piece of steel in my carbon chassis either.
Does anybody know if Matrix puts steel in his carbon chassis?
Does anybody know if Matrix puts steel in his carbon chassis?
#2136
just stick with the stock one , if you put all that extra's on your car and then buy a carbon chassis and still have a buggy thats way too heavy. Put a steel plate in it and you will reach 4 kilo ... the lighter the buggy the better it will handle on tracks.
#2138
#2140
Stock chassis with the SNR rear brace works for me, little flex and more reponsive with the rear suspension as I make changes it gives a more aggressive feel throught the corner.
#2141
new car 9e
some more pics few weeks ago, newer pics coming. hey Mind...the paint is patra racing red, white under coat and reg.white on sides..i paint my self.
had to send in my cc, mmp speed control back in after gettting to run it 6 times, car caught fire, due to red positive wire coming unsoldered from speedo. luckily i got my $200 lipo out in time and hopfully my servo and rec. are ok..hopefully mamba will get it corrected and back to me soon, i only bought the system 3 wks ago.. with the 2200kv motor at 16t, and 5200 50c lipo..
should i run 4s or ?? on the new 1800 short kv motor for more control on med. track.?
more power to smaller kv motor better or less power needed for smaller kv motor??
had to send in my cc, mmp speed control back in after gettting to run it 6 times, car caught fire, due to red positive wire coming unsoldered from speedo. luckily i got my $200 lipo out in time and hopfully my servo and rec. are ok..hopefully mamba will get it corrected and back to me soon, i only bought the system 3 wks ago.. with the 2200kv motor at 16t, and 5200 50c lipo..
should i run 4s or ?? on the new 1800 short kv motor for more control on med. track.?
more power to smaller kv motor better or less power needed for smaller kv motor??
#2142
Absolutely Not.
Buggy chassis is 110$
No steel in the Matrix chassis....100% composite.
Correct.
#2143
Anyone heard from Robert @ Matrix? Just wondering when the chassis will be available.
#2144
#2145