Tekin RS ESC sensored
Tech Regular
iTrader: (3)
Tech Apprentice
I had a thought that because the Start RPM for the Boost is set to kick in really early, I wondered if it is just wheel spinning ?
Thanks for your help.
There was no problem with mine off the line last weekend in 12th scale, like a rocket!
Trev
Tech Elite
iTrader: (15)
Don't rule out wheel spin. I lost 2 spots at the start of the A-main at our last state race because I spun the wheels at the start and pretty much stayed stationary.
I started second, fell to fourth, got peeled, fell to sixth, and worked my way back up to finish second in the end. So it worked out in the end.
I started second, fell to fourth, got peeled, fell to sixth, and worked my way back up to finish second in the end. So it worked out in the end.
Tech Apprentice
Thanks for your help guys - I think I will play with the start and end RPM
Jamie
Jamie
Nice pics.
Tech Regular
iTrader: (21)
i have been trying to get v4 to be sent to me thru tekin website but for some reason its not coming thru to my email.. can someone please email it to me.. i need it for a practice run.. im not home so i cant use it I like usually do.. thanks
[email protected]
[email protected]
Tech Regular
iTrader: (21)
i have been trying to get v4 to be sent to me thru tekin website but for some reason its not coming thru to my email.. can someone please email it to me.. i need it for a practice run.. im not home so i cant use it I like usually do.. thanks
[email protected]
[email protected]
Originally Posted by Randy_Pike;
Nice pics.
Tech Master
iTrader: (3)
I am not here to start any fights between SP and Team Tekin especially since in the future I want to get a Tekin to go with a TM E4RS for space, but how do these pictures prove a "Team Driver from SP" was perpetrating a fraud here? I can make out the sticker and maybe the Tekin wire attachment posts but there is no picture of the car or car with driver. If he did do it though then that is F***** up and he needs to be FIRED!!!
The funniest thing to me really is that SP obviously sponsored the event with handout SP11.5 motors and then this happens. So they spent a lot of money and appear to have only got some negative publicity!
Tech Elite
iTrader: (30)
i know that some of you have been waiting for this
Attachment 562600
Attachment 562601
Randy, Emile and Scotty Ernst you got mail
Attachment 562600
Attachment 562601
Randy, Emile and Scotty Ernst you got mail
esc setup
I now have an rs with a redline 17.5...how do I begin setting up the esc? How do I know when the appropriate gearing has been reached what am I looking for..what about timing, Turbo etc. How do I know when all of this is right...I will be running on a 70x30 ft track..carpet.technical....help me .This will be for tc
hey guys i want to find out if my settings are ok for my motor. i really dont want to blow my motor with this esc lol
drag 25
reverse off
brake strength 90
neutral width 94
motor type bl/fw
throttle profile 5
voltage cutoff 2
push control off
timing boost 50
turbo max
turbo delay .1
turbo ramp 2.0
start rpm 2850
end rpm 12000
are these safe settings for a orion 17.5 vortex? im all new to this tekin and i really want to have good punch out of the corner and awsome topend on the straight.
i had some help setting this up but that was it. so i dont know what the limits of my motor are or the max rpm i can set the end rpm at without blowing it up. the car im driving is a cyclone s with 17t pullies and 96t spur and 40t pinion
drag 25
reverse off
brake strength 90
neutral width 94
motor type bl/fw
throttle profile 5
voltage cutoff 2
push control off
timing boost 50
turbo max
turbo delay .1
turbo ramp 2.0
start rpm 2850
end rpm 12000
are these safe settings for a orion 17.5 vortex? im all new to this tekin and i really want to have good punch out of the corner and awsome topend on the straight.
i had some help setting this up but that was it. so i dont know what the limits of my motor are or the max rpm i can set the end rpm at without blowing it up. the car im driving is a cyclone s with 17t pullies and 96t spur and 40t pinion