Speedmerchant Rev 8
#514
Tech Adept
If those are pod plates you got from me, email me your address and I will get a correct set out to you asap
#519
Tech Champion
iTrader: (17)
My build is coming along nicely. Ordered some Lunsford "accessories" for the front end camber and steering turnbuckles. Just because I have the ability to bend things that should not ever bend, mind you. I hope to have it running this weekend and get a real setup started.
#520
Hi Guys,
Just wanted to post some setup info from testing this weekend, my car was pretty choice, super easy to drive.
Front:
.19 springs
.5 deg camber
4 deg caster
3.2mm ride height
Rear:
.20 rear springs
Green Lube in the tubes
Blue center shock spring
3.4 mm ride height
Protoform AMR-12
Reedy 3.5T 25/94
Tires were Pro-One, Blue F/ Blue R
thx,
Steve Radecky
Just wanted to post some setup info from testing this weekend, my car was pretty choice, super easy to drive.
Front:
.19 springs
.5 deg camber
4 deg caster
3.2mm ride height
Rear:
.20 rear springs
Green Lube in the tubes
Blue center shock spring
3.4 mm ride height
Protoform AMR-12
Reedy 3.5T 25/94
Tires were Pro-One, Blue F/ Blue R
thx,
Steve Radecky
I get around faster with a 20 or 21 front. is there a driving style/skill that i need to develop to use the softer front? are you using exponential and a slower turn in to drive it thru the corner? these 1/12 cars get thru the corner so quickly it is difficult to imagine steering more slowly and still making the corner.
#521
Tech Elite
iTrader: (1)
Josh has a driving style, and you know he knows a TON about setup. So, you can bet his car suits his particular preferences. Don't be put off your own conclusions. Nothing you're describing sounds off the reservation; fast setups with 0.20 or 0.21 front springs are not uncommon.
#522
Josh has a driving style, and you know he knows a TON about setup. So, you can bet his car suits his particular preferences. Don't be put off your own conclusions. Nothing you're describing sounds off the reservation; fast setups with 0.20 or 0.21 front springs are not uncommon.
#523
Just received my Rev 8. Cant wait to build it!
Anyone know what servos fit perfectly.
I see there are two different mounting options.
Anyone know what servos fit perfectly.
I see there are two different mounting options.