Jconcepts Green Compound Fits SCT 3.0 x 2.2 inch wheel stocked
08-24-2012, 03:48 AM
#1
Jconcepts Green Compound Fits SCT 3.0 x 2.2 inch wheel stocked
Jconcepts 3Ds Green Compound Fits SCT 3.0 x 2.2 inch wheel #3061-02
As racing on both indoor and outdoor conditions have matured, a more flexible, supremely grippy tire design was necessary to drive the edgy, fast pace. The 3Ds grip as a new, highly sought after, favorite in these conditions. 3Ds excel on indoor and outdoor hard packed surfaces with either dry or wet conditions. Drivers will feel the immediate impact of the exclusive design and proprietary rubber compound as they rip around the track at blistering speeds. An all-out design for racing, pure JConcepts.
Debuted at the IFMAR World Championships in Pattaya, Thailand for the 1/8th buggy class, the 3Ds designed by Jason Ruona and tested by the JConcepts Team are a first of their kind. This is a ultimate Slick-groove tire, with a high-stability design of a black groove bar tire into an individually flexible pattern of finely spaced Double Dee lugs in one package.
Manufacturer: Jconcepts
Item no.: #3061-02
Jconcepts Pressure Points Green Compound Fits SCT 3.0 x 2.2 inch wheel #3049-02
JConcepts, a leader in Short Course performance with accredited victories around the world, including back-to-back ROAR National Championships, has added another piece to its successful racing arsenal. Just like all JConcepts tires, the Pressure Points are a proven winner. JConcepts driver Ryan Maifield won the 2011 Reedy Truck Race of Champions in the 4×4 class utilizing the Pressure Points in green compound.
The Pressure Points are designed to be driven hard while maintaining the grip necessary to drive at the limit. The edges of the side-walls have been carefully rolled for a smooth transition during corning which limits traction-roll characteristics and allows the driver control during the all important tipping point every driver has experienced.
Manufacturer: Jconcepts
Item no.: #3049-02
As racing on both indoor and outdoor conditions have matured, a more flexible, supremely grippy tire design was necessary to drive the edgy, fast pace. The 3Ds grip as a new, highly sought after, favorite in these conditions. 3Ds excel on indoor and outdoor hard packed surfaces with either dry or wet conditions. Drivers will feel the immediate impact of the exclusive design and proprietary rubber compound as they rip around the track at blistering speeds. An all-out design for racing, pure JConcepts.
Debuted at the IFMAR World Championships in Pattaya, Thailand for the 1/8th buggy class, the 3Ds designed by Jason Ruona and tested by the JConcepts Team are a first of their kind. This is a ultimate Slick-groove tire, with a high-stability design of a black groove bar tire into an individually flexible pattern of finely spaced Double Dee lugs in one package.
Manufacturer: Jconcepts
Item no.: #3061-02
Jconcepts Pressure Points Green Compound Fits SCT 3.0 x 2.2 inch wheel #3049-02
JConcepts, a leader in Short Course performance with accredited victories around the world, including back-to-back ROAR National Championships, has added another piece to its successful racing arsenal. Just like all JConcepts tires, the Pressure Points are a proven winner. JConcepts driver Ryan Maifield won the 2011 Reedy Truck Race of Champions in the 4×4 class utilizing the Pressure Points in green compound.
The Pressure Points are designed to be driven hard while maintaining the grip necessary to drive at the limit. The edges of the side-walls have been carefully rolled for a smooth transition during corning which limits traction-roll characteristics and allows the driver control during the all important tipping point every driver has experienced.
Manufacturer: Jconcepts
Item no.: #3049-02
08-24-2012, 05:17 AM
#2
Ran the 3Ds this past Wednesday (rears on XXX-SCT, green compound). Hard packed indoor clay with minor/medium dust build up as more laps are run. Worked very well. Noticeably more traction on corner apexing and exit acceleration. Comparing to fairly fresh JC Pressure Points and medium worn Hot Bodies Beams. Running the Pressure Points on the front.
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
