ts

Brad: I run Eric's stuff in oval. The only time I've ran my Fuji motor I had it at 36 degrees. I'm going to try it with a little less at the NORRCA warmup race next week. It ran great at 36 with the 4383's. I haven't got the gearing right on running less than 36 degrees. I have some xxx's to try in one motor next week. You need to make the trip to Henderson, TN for the NORRCA nats in May.

BHayes

iTrader: (2)

ts,

Less timing and more rollout seems to be the ticket for the smaller carpet tracks. I am not sure if it would work as well on a big track though. Let me know how it goes at the warmup race. I hear that is an awesome track, and I would love to make it down there sometime.

I'll be running the EA Fuji's next week at the Carpet Oval Nats. I'll let you know what I learn fom that race.

Brad

ts

Brad: Thanks for letting me know. Did the Fuji's turn more RPM with the xxx brush? Come on down for the Nats in May. Some of the guys from Indy are coming. They came down last year.
todd

BHayes

iTrader: (2)

ts,

I am not sure what the difference was on the dyno. EA is building a couple of more for me right now, so if he sees this, maybe he can answer how the XXX's compare to the 4383's on the dyno. On the track, they both seemed to like similar gearing, so I suspect there was not a huge difference in RPM. I have only ran the XXX's in 2 heats, so I don't have much experience with them yet. I'll be able to do more back to back runs with them and 4383's next week at the carpet oval nats. So I'll let you know how they compare.

I know some guys from here will be down for the NORRCA race. I'm just not sure what my work schedule looks like for then yet.

Brad

ts

Thanks Brad. Good luck at the nats!! Wish I could make it. Understand the work thing!

EAMotorsports

iTrader: (79)

Hey Brad welcome to the thread. For those that dont know Brad he was the orignal owner of ADX oval cars and is an engineer by trade. Ive got him working on a few projects for EAM and Hayes Engineering.

EA

EAMotorsports

iTrader: (79)

Hey guys Ive got all the TC size PRS gears in stock. Including the 112-116's for the new xray. Get em while they are here.

Pinions will be here in a week or so. Most are out of stock.

More products coming soon!!

EA

trackdesigner71

iTrader: (6)

I sent you a PM and an email bud. Lookin to hear from you soon.

Turbonium

iTrader: (27)

good... can you keep me a few of the 100/104's? using them for the RDX and 415... ill add them to my order on monday...

BHayes

iTrader: (2)

Thanks EA,

Yes I am working on some new stuff for EA Motorsports. I am sure you guys will like what we come up with.

TryHard

iTrader: (4)

Hey guys, Just want to check something again.

I've got a pair of slotted 767's in my pitbox, how will these compare with full-face ones (which I usually run)?
It's a vertical slot, btw.

Motor is a ROAR, with purple/red.

regards
Ed

MR JOLLY

you could of asked me that on thursday

you will get more top end ,less heat build up in the middle of brush also,brush will bed in quicker also

next??

EA
haven`t gotten my package yet either, tryhard is giving me a hard time

raving-monkey

well he is trying hard (sorry Ed...couldn't resist )

i really must get myself a serrator and a slotter...so i can mess around with stuff like this.

how much do they generally go for (any recomendations?)

MR JOLLY

matt you following me!!!

mines a xipp serrater helgar do this in the uk

TryHard

iTrader: (4)

Colin... simply, I forgot...
And am I giving you a hard time...just J/king