SC10 increase in speed....
#1
SC10 increase in speed....
Ok so I have an Assc. SC10....I love this truck...lots of fun to drive...but I want to get some speed out this pig...I like the Reedy 3300 in it but there has to be a way to get some increased power.....any suggestions ?? Gearing ?? Motor ??? I use the standard 6 cell Nimh batteries....not wanting to make the jump to lipo's yet...especially since I have other vehicles to drive with these....
#3
You could upgrade the brushless system, or upgrade to lipo's.
#4
If you're just bashing.. You can even stick a 3s in it with the stock reedy 3300kv and SC450 ESC.. It's designed for either 2s or 3s.. That makes quite a difference
#5
You need more juice!!!!!!
Your batteries are most likely limiting you........that motor is capable of using more power than your nimh can give it.
A faster brushless system is worthless if you cannot supply it the power it needs.....sorry but you are going at it backwards....get the juice needed to feed the speed...then go for the speed.
A faster brushless system is worthless if you cannot supply it the power it needs.....sorry but you are going at it backwards....get the juice needed to feed the speed...then go for the speed.
#6
Tech Fanatic
iTrader: (8)
agreed with everyone.....no point in upgrading anything else power-wise until you have the packs to support it. if you cant afford lipo now, then save up. you can get two hard case packs and a good charger at hobbypartz.com under 100 shipped.
http://www.hobbypartz.com/98p-25c-40...-hardcase.html
and
http://www.hobbypartz.com/thac6smbachw.html
http://www.hobbypartz.com/98p-25c-40...-hardcase.html
and
http://www.hobbypartz.com/thac6smbachw.html
#8
Tech Regular
iTrader: (25)
I know some will hate on Turnigy, but it's all ive ran for Lipos and havent had 1 problem with them.
If your not familiar with hobby king, you can get a lipo charger and lipos for the same, if not cheaper than a good nimh.
spend about $50 on the charger/power supply, and a 3s will be around the $35 mark and youll have speed for days.
If your not familiar with hobby king, you can get a lipo charger and lipos for the same, if not cheaper than a good nimh.
spend about $50 on the charger/power supply, and a 3s will be around the $35 mark and youll have speed for days.
#9
Tech Regular
Looking to purchase a brushless sc10. Are they that slow? I will run 40C two cell lipos. If anyone is running this setup, I would like your opinion on speed and torque. Thanks
#10
#12
Tech Addict
iTrader: (36)
Ok so I have an Assc. SC10....I love this truck...lots of fun to drive...but I want to get some speed out this pig...I like the Reedy 3300 in it but there has to be a way to get some increased power.....any suggestions ?? Gearing ?? Motor ??? I use the standard 6 cell Nimh batteries....not wanting to make the jump to lipo's yet...especially since I have other vehicles to drive with these....
#13
Tech Master
iTrader: (17)
Ok so I have an Assc. SC10....I love this truck...lots of fun to drive...but I want to get some speed out this pig...I like the Reedy 3300 in it but there has to be a way to get some increased power.....any suggestions ?? Gearing ?? Motor ??? I use the standard 6 cell Nimh batteries....not wanting to make the jump to lipo's yet...especially since I have other vehicles to drive with these....
#14
Tech Regular
Do not want to go with 3S batteries. Anyone confirm that this rig will have plenty of torque/speed with 2s 40C lipos? Are 40C's ok? Looks like I may order today so any quick info would be great. Mostly wanting to hear about speed and torque of stock brushless motor. Thanks again all.......
#15
Do not want to go with 3S batteries. Anyone confirm that this rig will have plenty of torque/speed with 2s 40C lipos? Are 40C's ok? Looks like I may order today so any quick info would be great. Mostly wanting to hear about speed and torque of stock brushless motor. Thanks again all.......