44Likes21.5 motor
08-15-2018, 10:58 AM
#78
Every now and then, he fools people into believing he races lol!
08-15-2018, 12:11 PM
#79
What is the best 21.5 motor currently on the market? Im running a new trinity certified gold and getting my doors blown off.
08-15-2018, 02:04 PM
#81
That shipment might arrive in 2021 when the Chinese tariffs will be canceled....
As far as a good 21.5t motor to buy, I would recommend a Fantom fr-1 v3R with all the bells and whistles, ready for when their WHD18 rotor come out hopefully in 2021......
As far as a good 21.5t motor to buy, I would recommend a Fantom fr-1 v3R with all the bells and whistles, ready for when their WHD18 rotor come out hopefully in 2021......
08-15-2018, 03:09 PM
#83
I would suggest a total car breakdown, cleaning , light polishing/anti-static treament, sanding all your wheel hexes, running unshielded bearings, and reshimming on the very loose side, before you give up on your motor and buy a new one: what's your setup, gearing, car weight, rotational drivetrain mass ???
Last edited by bertrandsv87; 08-15-2018 at 03:20 PM.
08-15-2018, 03:31 PM
#84
I would suggest a total car breakdown, cleaning , light polishing/anti-static treament, sanding all your wheel hexes, running unshielded bearings, and reshimming on the very loose side, before you give up on your motor and buy a new one: what's your setup, gearing, car weight, rotational drivetrain mass ???
08-15-2018, 04:10 PM
#85
More like the laundromat sheets to very lightly coat all surfaces(metal, plastic,etc) with the static eliminating formula... Special attention to the polycarbonate body(in&out) and the bottom of the chassis to stop that crazy power robbing crc carpet static....Of course, I have not actually tested it before but it should eliminate all winter weather static friction losses and any other magnetic effect caused thereby..
You can also complete the anti-static treatment by adding a very small amount of NMF to your bearing oil..Personally I like the NMF and Bestline powertrain lube combo..The NMF/Bestline engine treatment/Amsoil premium 10w40 combo works flawlessly in my 4.0L Jeep......
JUST ONE OF BERT'S SPEED SECRETS !!! LOL .....
You can also complete the anti-static treatment by adding a very small amount of NMF to your bearing oil..Personally I like the NMF and Bestline powertrain lube combo..The NMF/Bestline engine treatment/Amsoil premium 10w40 combo works flawlessly in my 4.0L Jeep......
JUST ONE OF BERT'S SPEED SECRETS !!! LOL .....
Last edited by bertrandsv87; 08-15-2018 at 04:43 PM.
08-15-2018, 04:36 PM
#86
give him a break just so you know if you guys are at a big event dont worry bert will be close by just a keyboard away, he will be monitoring rctech to give any one any set up help with any chassis /surface/dirt/pavement/ over water nothing is out of his expertise, maybe ill ask the admin to have a sub-forum just for him for all the "Q's and A's"
08-15-2018, 06:12 PM
#89
The NMF/Bestline stuff also works on all my rc cars, and I should be at the track mid October to prove it will work on my Novak 21.5t motor as well....I hope you guys try it soon...
