A.I. Modified Motors - Service.
05-31-2007, 09:44 AM
#1
A.I. Modified Motors - Service.
Hello,
I decided im going to start modifying motors part time and want to present my service to the great community of RC-TECH. If anyone is interested. I will modify a motor , new or used. Some of you may know my work from STS motors.
To keep it simple. Here is my service: For any .12 , .21 , .28 or above nitro motor.
Stage II: $55
Modify & Improve Sleeve Flow , Crank Mod
Stage III or Team Mod: $75
Modify & Improve Sleeve Flow , Crank Mod , Silicone Filled Crank , A.I. Heatsink Cooling Mod & Light polish
Stage IIII: $95
Modify & Improve Sleeve Flow to your exact needs or for all out race & Hand Polish , Extreme Crank Mod , Silicone Filled Crank , A.I. Heatsink Cooling Mod and more...
Misc Add-On Services:
I can also offer a sleeve pinch for .12 $20
As well can do a full polish service for $20
Speed Boost Film Applicant for $10
To dissasemble $5 (if you dont take it apart)
To reassemble $5 (if you want me to reassamble)
These prices include proper cleaning and shipping back to you. Turn around time will vary on load. Stage II is normally the basic job youll find and performance increase will be quite adequate for anyone. Stages III and IIII offer extra performance and refinement. I reccomend stage III to everyone its what youll find most people go for. Stage II also gets it done , just isnt as cleaned up as the others.
If your interested PM ME. Ill give you my address and you can send payment inside the box or package or I accept payment via paypal. Inlcude all services you wish to have. As well have return address inside so I can easily return it to you. It would be best to just send the sleeve and crank to me to modify to save yourself shipping cost as well have it dissambled to save me time. If you want it reassmbled , just note it and include the cost to cover that. If you want the A.I. Cooling mod , I need your heatsink and button head.
Thanks A.I.
I decided im going to start modifying motors part time and want to present my service to the great community of RC-TECH. If anyone is interested. I will modify a motor , new or used. Some of you may know my work from STS motors.
To keep it simple. Here is my service: For any .12 , .21 , .28 or above nitro motor.
Stage II: $55
Modify & Improve Sleeve Flow , Crank Mod
Stage III or Team Mod: $75
Modify & Improve Sleeve Flow , Crank Mod , Silicone Filled Crank , A.I. Heatsink Cooling Mod & Light polish
Stage IIII: $95
Modify & Improve Sleeve Flow to your exact needs or for all out race & Hand Polish , Extreme Crank Mod , Silicone Filled Crank , A.I. Heatsink Cooling Mod and more...
Misc Add-On Services:
I can also offer a sleeve pinch for .12 $20
As well can do a full polish service for $20
Speed Boost Film Applicant for $10
To dissasemble $5 (if you dont take it apart)
To reassemble $5 (if you want me to reassamble)
These prices include proper cleaning and shipping back to you. Turn around time will vary on load. Stage II is normally the basic job youll find and performance increase will be quite adequate for anyone. Stages III and IIII offer extra performance and refinement. I reccomend stage III to everyone its what youll find most people go for. Stage II also gets it done , just isnt as cleaned up as the others.
If your interested PM ME. Ill give you my address and you can send payment inside the box or package or I accept payment via paypal. Inlcude all services you wish to have. As well have return address inside so I can easily return it to you. It would be best to just send the sleeve and crank to me to modify to save yourself shipping cost as well have it dissambled to save me time. If you want it reassmbled , just note it and include the cost to cover that. If you want the A.I. Cooling mod , I need your heatsink and button head.
Thanks A.I.
Last edited by Artificial-I; 12-27-2008 at 04:13 PM.
12-20-2008, 12:36 PM
#8
We used a motor done by A.I. Mods at the Open Wheel race in NC. ( Dirt Oval) last week, very satisfied with the job Mike did with our motor. Don't be affraid to use this Motor guy for your motor Modding. Mike I will be in touch after the holidays for another motor, We have another Dirt Oval race in the NE in Feb. and interested in a back-up motor. Thanks, again
12-22-2008, 09:43 AM
#11
I treat each motor and what the customer is aiming for as the goal of the mod. I dont have any set timing that I perform on all motors , they are all different. I do fill stage III/IIII motors , it states so in the initial post.
Ill post up some pics of my work. I dont really feel you can tell how a motor feels from looks...but just by simply how it performs. Reason why I will be working with quite a lot of people with reviews and feedback. As I always have with my motors and drivers. Also for the price as of now, I try to offer the most hp per dollar.
I will post up some shots for those who want to see some eye candy.
Ill post up some pics of my work. I dont really feel you can tell how a motor feels from looks...but just by simply how it performs. Reason why I will be working with quite a lot of people with reviews and feedback. As I always have with my motors and drivers. Also for the price as of now, I try to offer the most hp per dollar.
I will post up some shots for those who want to see some eye candy.
